Extracted text (via pymupdf_layout)
14786 characters
g should be employed to BULLSEYE e staging area. AND ontainers "TARGET" rs are 40' long) SIGN 3-4 Dumpsters ical lift machines (Approx. 15) TARGET STORE TARGET STORE EXISTING TARGET MONUMENT SIGN CVS PHARMACY SIGN ORDER PICKUP SIGN DRIVE UP SIGN BULLSEYE AND "TARGET" SIGN Staging Area EXISTING TARGET MONUMENT SIGN Image Source: Nearmap US, Inc. NTS T0639 Mesa East 1525 S Power Rd REM STAGING PLAN Mesa, AZ 85206 04/07/2026 COLOR KEY: DE# 346 SWAN WHITE DE# 6192 NOMADIC TAUPE DE# 692 KILN DRIED C-20 CHAMPAGNE C-1 RED All paint colors shown are new paint colors. This scope intends to get the new paint colors approved. Front Elevation Left Elevation NOTE: Rear Elevation *EXISTING FINISHES SHOWN FOR REFERENCE. * EXISTING ICCMU AND PREFINISHED METAL AREAS-NO PAINT; PAINT HM DOOR AND FRAME TO MATCH ADJ. WALL, TYP. *STORE EXTERIOR WALLS ARE PRIMARILY CMU *BEN-5 : STRAIGHT, COLOR..................RED GENERAL NOTE * AREA TO BE PAINTED STARTS AT TOP OF CURB OR REVEAL AND CONTINUES TO TOP OF PARAPET/FLASHING OR REVEAL. PAINT COLOR AND FINISH TRANSITIONS OCCUR AT EXISTING VERTICAL CONTROL JOINTS OR AT INSIDE BUILDING CORNERS, U.N.O. * ALL EXISTING WALL-MOUNTED ITEMS TO BE PAINTED TO MATCH ADJ. WALL SURFACE, U.N.O. Right Elevation * PATCH ALL VISIBLE HOLES FROM MOUNTING OF REMOVED SIGNS WITH LIKE MATERIALS. RESTORE WALL SURFACE TO ‘ LIKE NEW’ APPEARANCE. 168 SF RSP Architects Ltd. T-Meza East, AZ: Remodel - Exterior Design March 09, 2026 Existing Condition Front Elevation RSP Architects Ltd. T-Meza East, AZ: Remodel - Exterior Design March 09, 2026 C A E E F E E D A (t) B D ACRYLIC FACED ILLUMINATED LOGO & LETTERS / LC-3W Scale: 3/8” = 1’-0” LOGO LETTERS SEAMS @ SIGN TYPE A B C D E F RETAINER T/C - RET. LOGO SQ.FT. LL120/80 LC-3R 10’-0” 6’-8” 36’-9 1/2” 25’-11” 1’-8” 3’-4” 1” ½” RET 2 375.4 LL108/72 LC-3R 9’-0” 6’-0” 33’-1 1/4” 23’-4” 1’-6” 3’-0” 1” 1” T/C 2 304.1 LL96/64 LC-3R 8’-0” 5’-4” 29’-5” 20’-8 7/8” 1’-4” 2’-8” 1” 1” T/C 2 237.3 LL84/56 LC-3R 7’-0” 4’-8” 25’-9 1/4” 18’-1 3/4” 1’-2” 2’-4” 1” 1” T/C 2 184 LL72/48 LC-3R 6’-0” 4’-0” 22’-0 5/8” 15’-6 5/8” 1’-0” 2’-0” 1” 1” T/C 0 135.2 LL60/40 LC-3R 5’-0” 3’-4” 18’-4 3/4” 12’-11 1/2” 10” 1’-8” 1” 1” T/C 0 93.9 LL48/32 LC-3R 4’-0” 2’-8” 14’-8 3/4” 10’-4 3/8” 8” 1’-4” 1” 1” T/C 0 60 LL36/24 LC-3R 3’-0” 2’-0” 11’-0 3/4” 7’-9 3/8” 6” 1’-0” 1” 1” T/C 0 33.8 LL24/16 LC-3R 2’-0” 1’-4” 7’-4 1/2” 5’-2 1/4” 4” 8” 1” ¾” T/C 0 15 Approvals: This is an original drawing created by Walton. It Revision: Signs will be manufactured with 120 or 277 Volts A/C. This sign is intended to be installed in Client: TARGET is submitted for your personal use, however, it R1) 08/11/17 design intent change - LAH All Primary electrical service to the sign,and final accordance with the requirements of Sales: Date: Address: X shall at all times remain the property of Walton. connection thereof, is the responsibility of the buyer. Article 600 of the National Electrical It may be used in connection with the project All work is to be done in accordance with the purchase Code and/or other applicable local P.M.: Date: City/State: X being planned for you by Walton, but not agreement attached hereto. In case of variance codes. This includes proper CIDFAMILY HOUSE RH otherwise. You are not authorized to show between the specifications of the purchase agreement grounding and bonding of the sign. Design: Date: Sales: Designer: these drawings to anyone outside your and this drawing, the drawing shall prevail. Date: 06.28.22 PM JMD organization, nor is it to be reproduced, used, Client: Date: copied or exhibited in any fashion. H: PAGE SIZE: 11” x 17” 6 1/2" MIN 5 1/2" MIN C P3 1A 7" MAX C P3 1B 6" MAX ILLUMINATION NOTES: 6" 5" P3 2 P3 2 LED COLOR: RED (MINIMUM 635NM PEAK WAVELENGTH – MAXIMUM 660NM PEAK WAVELENGTH) 11 11 SLOAN PRISM 24V RED LED MODS P3 4 D P3 5 12 12 5" 3” 3 3 THRU HOLE 3/4" (6) 3/8” RIVNUT 1 1/4" P2 6A P2 6B 1” x 2” PASS THRU (6) 3/8” BOLT 7 7 .125 ALUMINUM PLATE B 8 B 8 WELDED TO LETTER RETURN AND BACK 1’-8” 1’-4” 9 9 .125 ALUMINUM 10 10 A A 1 1/8" 3/4" LOGO SECTION MATCH PLATE SECTION DETAIL @ LOGO/SYMBOL SECTION DETAIL @ LETTERS Scale: 1 1/2” = 1’-0” 1/8” N.T.S. N.T.S. ASSEMBLY DETAIL AT LOGO SEAM QTY: 2 PER SEAM Scale: Not to Scale 1” x 3/16” CLEAR ACRYLIC GUIDE 3/4” FASTENER SCHEDULE FOR USE WITH WOOD OR STUCCO WALL 1/4” BLUE & LAG SCREW SYSTEMS. 1-1/2” MIN PENETRATIONS (EXCL. TIP) - TO DISPLAY RED DURING DAY / RED AT NIGHT FOR USE WITH WOOD OR STUCCO WALL 3/8” 1/4” SNAP TOGGLE SYSTEMS. MATERIALS: 1-1/2” MIN PENETRATIONS (EXCL. TIP) FOR USE WITH WOOD OR EIFS WALL # DESCRIPTION 1/4” LAG SCREW SYSTEMS. 1-1/2” MIN PENETRATIONS (EXCL. TIP) 1A .063 x 6” DEEP ALUMINUM RETURN FOR USE WITH WOOD OR EIFS WALL FINISHES: 1/4” LAG & SHIELD SYSTEMS. 1B .040 x 5” DEEP ALUMINUM RETURN 1-1/2” MIN PENETRATIONS (EXCL. TIP) 2 SHORT SHANK FLAT HEAD STAINLESS STEEL SCREWS 1/4” DIA. THREADED FOR USE WITH WOOD, CONCRETE ROD & BEARING PLATES BLOCK OR EIFS WALL SYSTEMS 3 3/16” LD MODIFIED ACRYLIC 2793 RED (ALTUGLAS OR EQUIV.) ACRYLIC SEAM DETAIL @ LOGO 4 1” .063 FABRICATED RETAINER Scale: 1” = 1’-0” 1/4” DIA. THREADED FOR USE WITH WOOD, CONCRETE P1 P2 P3 ROD BLOCK OR EIFS WALL SYSTEMS 5 1” “J” PROFILE TRIM CAP MATTHEWS BRIGHT MATHEWS SOA020SP WHITE MP3909 1/4” RED HEAD L.D.T. FOR USE WITH CONCRETE BLOCK, TARGET WHITE TARGET RED (LARGE DIAMETER BRICK OR CONCRETE, 6A .080 ALUMINUM BACK (GLOSS) (GLOSS) EMBED A MIN OF 2 1/2” TAPCON) 6B .063 ALUMINUM BACK 1/4” DIA. HILTI HIT ROD FOR USE WITH CONCRETE, NOTES: WITH Hy150 MAX EMBED A MIN. OF 2” 7 PAIGE L.E.D. TRANSFORMER BOX WITH POWER SUPPLY (OR EQUIVALENT) ADHESIVE A. 1/4” WEEP HOLES WITH LIGHT BLOCKERS 2 PER LOW SPOT 8 PAIGE WALL BUSTER #980014 PASS THRU KIT with BUSHING B. SEAL PENETRATIONS WITH BASF-MASTER SEAL NP 150 (OR EQUIVALENT) 1/4” DIA. HILTI HIT ROD FOR USE WITH MASONRYAND BRICK WITH Hy20 ADHESIVE EMBED A MIN. OF 3 3/8” 9 RED L.E.D.s PER “ILLUMINATION NOTES” C. ONE UL LABEL VISIBLE FROM GROUND, OTHERS ON TOP UL LABEL LOCATION D. CHANNEL LETTERS 60” & OVER REQUIRE 1/2” x 1” METAL RETAINER 1/4” DIA. HILTI HIT ROD FOR USE WITH CONCRETE BLOCK, 10 WATER PROOF LOCKABLE DISCONNECT SWITCH BY GC STD. BOTTOM LEFT CORNER WITH Hy20 ADHESIVE EMBED A MIN. OF 2” 11 MOUNTING SPACERS - 1” MAX / 1/2” MIN. STAND OFF o TOP OF LETTERS / NOT VISIBLE FOR USE WITH CONCRETE, MASONRY o ü SEE NOTE 1/4” DIA. HILTI HLC AND BRICK 12 1/4” SS ATTACHMENT HARDWARE PER SITE CONDITIONS SLEEVE ANCHOR EMBED A MIN. OF 3 3/8” Approvals: This is an original drawing created by Walton. It Revision: Signs will be manufactured with 120 or 277 Volts A/C. This sign is intended to be installed in Client: TARGET is submitted for your personal use, however, it R1) 08/11/17 design intent change - LAH All Primary electrical service to the sign,and final accordance with the requirements of Sales: Date: Address: X shall at all times remain the property of Walton. connection thereof, is the responsibility of the buyer. Article 600 of the National Electrical It may be used in connection with the project All work is to be done in accordance with the purchase Code and/or other applicable local P.M.: Date: City/State: X being planned for you by Walton, but not agreement attached hereto. In case of variance codes. This includes proper CIDFAMILY HOUSE RH otherwise. You are not authorized to show between the specifications of the purchase agreement grounding and bonding of the sign. Design: Date: Sales: Designer: these drawings to anyone outside your and this drawing, the drawing shall prevail. Date: 06.28.22 PM JMD organization, nor is it to be reproduced, used, Client: Date: copied or exhibited in any fashion. H: PAGE SIZE: 11” x 17” 5 1/2" MIN D P3 1 6" MAX ILLUMINATION NOTES: 5" P3 2 LED COLOR: WHITE 6500K 11 SLOAN PRISM 24V 6500K WHITE LED MODS P3 5 LED COLOR: RED (MINIMUM 635NM PEAK WAVELENGTH – MAXIMUM 660NM PEAK WAVELENGTH) 12 SLOAN PRISM 24V RED LED MODS A 3 4 D P2 6 7 C B A C 8 9 ACRYLIC FACED ILLUMINATED LETTERS 10 Scale: 1/4” = 1’-0” B SIGN TYPE A B C D SQ. FT. DriveUp16-R 16” 1’-9 3/8” 2’-9 3/4” 12’-2 7/8” 34.17 SECTION DETAIL @ LETTERS DriveUp18-R 18” 2’-0” 3’-1 7/8” 13’-9 1/4” 43.46 N.T.S. DriveUp20-R 20” 2’-2 3/4” 3’-6 1/8” 15’-3 5/8” 46.06 FASTENER SCHEDULE DriveUp24-R 24” 2’-8” 4’-2 1/2” 18’-4 1/8” 77.33 FOR USE WITH WOOD OR STUCCO WALL 1/4” BLUE & LAG SCREW SYSTEMS. 1-1/2” MIN PENETRATIONS (EXCL. TIP) FOR USE WITH WOOD OR STUCCO WALL 1/4” SNAP TOGGLE SYSTEMS. 1-1/2” MIN PENETRATIONS (EXCL. TIP) FOR USE WITH WOOD OR EIFS WALL 1/4” LAG SCREW SYSTEMS. 1-1/2” MIN PENETRATIONS (EXCL. TIP) MATERIALS: FOR USE WITH WOOD OR EIFS WALL FINISHES: 1/4” LAG & SHIELD SYSTEMS. # DESCRIPTION 1-1/2” MIN PENETRATIONS (EXCL. TIP) 1 .040 x 5” DEEP ALUMINUM RETURN 1/4” DIA. THREADED FOR USE WITH WOOD, CONCRETE ROD & BEARING PLATES BLOCK OR EIFS WALL SYSTEMS 2 SHORT SHANK FLAT HEAD STAINLESS STEEL SCREWS CAR LOGO COLORS 3 3/16” LD MODIFIED ACRYLIC 7328 WHITE 1/4” DIA. THREADED FOR USE WITH WOOD, CONCRETE P1 P2 P3 Target Red DARK RED DARK GRAY LIGHT GRAY ROD BLOCK OR EIFS WALL SYSTEMS 4 3/16” LD MODIFIED ACRYLIC 2793 RED MATTHEWS BRIGHT MATHEWS PMS 186 PMS 188 PMS 425 PMS 421 SOA020SP WHITE MP3909 1/4” RED HEAD L.D.T. FOR USE WITH CONCRETE BLOCK, TARGET WHITE TARGET RED (LARGE DIAMETER BRICK OR CONCRETE, 5 1” “J” PROFILE TRIM CAP (GLOSS) (GLOSS) EMBED A MIN OF 2 1/2” TAPCON) 6 .063 ALUMINUM BACK 1/4” DIA. HILTI HIT ROD FOR USE WITH CONCRETE, NOTES: WITH Hy150 MAX EMBED A MIN. OF 2” 7 PAIGE POWER SUPPLY BOX WITH POWER SUPPLY (OR EQUIVALENT) ADHESIVE A. DIGITAL PRINT VINYL APPLIED FIRST SURFACE AT LOGO 8 PAIGE WALL BUSTER #980014 PASS THRU KIT with BUSHING B. 1/4” WEEP HOLES WITH LIGHT BLOCKERS 2 PER LOW SPOT 1/4” DIA. HILTI HIT ROD FOR USE WITH MASONRYAND BRICK WITH Hy20 ADHESIVE EMBED A MIN. OF 3 3/8” 9 RED L.E.D.s PER “ILLUMINATION NOTES” C. SEAL PENETRATIONS WITH BASF-MASTER SEAL NP 150 (OR EQUIVALENT) UL LABEL LOCATION D. ONE UL LABEL VISIBLE FROM GROUND, OTHERS ON TOP 1/4” DIA. HILTI HIT ROD FOR USE WITH CONCRETE BLOCK, 10 WATER PROOF LOCKABLE DISCONNECT SWITCH BY GC STD. BOTTOM LEFT CORNER WITH Hy20 ADHESIVE EMBED A MIN. OF 2” 11 MOUNTING SPACERS - 1” MAX / 1/2” MIN. STAND OFF o TOP OF LETTERS / NOT VISIBLE FOR USE WITH CONCRETE, MASONRY o ü SEE NOTE 1/4” DIA. HILTI HLC AND BRICK 12 1/4” SS ATTACHMENT HARDWARE PER SITE CONDITIONS SLEEVE ANCHOR EMBED A MIN. OF 3 3/8” Approvals: This is an original drawing created by Walton. It Revision: Signs will be manufactured with 120 or 277 Volts A/C. This sign is intended to be installed in Client: TARGET is submitted for your personal use, however, it R1) 08/11/17 design intent change - LAH All Primary electrical service to the sign,and final accordance with the requirements of Sales: Date: Address: X shall at all times remain the property of Walton. connection thereof, is the responsibility of the buyer. Article 600 of the National Electrical It may be used in connection with the project All work is to be done in accordance with the purchase Code and/or other applicable local P.M.: Date: City/State: X being planned for you by Walton, but not agreement attached hereto. In case of variance codes. This includes proper CIDFAMILY HOUSE RH otherwise. You are not authorized to show between the specifications of the purchase agreement grounding and bonding of the sign. Design: Date: Sales: Designer: these drawings to anyone outside your and this drawing, the drawing shall prevail. Date: 06.28.22 PM JMD organization, nor is it to be reproduced, used, Client: Date: copied or exhibited in any fashion. H: PAGE SIZE: 11” x 17” WINDOW DIMENSIONS VARIES SQ. FT SIGN TYPE (1 BOX) OPU-SV7-W VINYL 7.6sf NOTE: WINDOW DIMENSION VARIES ADJUST TO FIELD CONDITIONS VARIES 3'-6 1/2" DIMENSIONS WINDOW 7" 2'-2" V1 A 1st SURFACE OPAQUE WHITE VINYL Scale: 1” = 1’-0” FINISHES: V1 WHITE 25% of window area based 3M 7725-10 on 272 SF of window area = 68 SF of window signage NOTES: A. VINYL APPLIED FIRST SURFACE allowed Approvals: This is an original drawing created by Walton. It Revision: Signs will be manufactured with 120 or 277 Volts A/C. This sign is intended to be installed in Client: TARGET is submitted for your personal use, however, it R1) 08/11/17 design intent change - LAH All Primary electrical service to the sign,and final accordance with the requirements of Sales: Date: Address: X shall at all times remain the property of Walton. connection thereof, is the responsibility of the buyer. Article 600 of the National Electrical It may be used in connection with the project All work is to be done in accordance with the purchase Code and/or other applicable local P.M.: Date: City/State: X being planned for you by Walton, but not agreement attached hereto. In case of variance codes. This includes proper CIDFAMILY HOUSE RH otherwise. You are not authorized to show between the specifications of the purchase agreement grounding and bonding of the sign. Design: Date: Sales: Designer: these drawings to anyone outside your and this drawing, the drawing shall prevail. Date: 06.28.22 PM JMD organization, nor is it to be reproduced, used, Client: Date: copied or exhibited in any fashion. H: PAGE SIZE: 11” x 17” Main ID Logo - Face Lit Horizontal C 3” D E F A G B Sign Elevation - Front View A Scale: N.T.S. 3” ALUMINUM RETURN typ. CHANNEL LOCK OR RIVET PAN HEAD SCREW TRIM CAP STEEL ANGLE WELD-ON 16 & RESIN BOND S.S. THREADED ROD w/ OR CHANNEL BOND HEX NUT & LOCK WASHER TYPE A B C D E F G SQ.FT. SPACER (OPTIONAL) IL-15-CL-L 15" 9 1/16" 11'-9 1/8" 1'-7 1/16" 3'-5 1/4" 6'-3 3/8" 1'-6 7/8" 14.70 TO NEXT LETTER - 3” deep .040 alum. returns pre-finished Hunter Red IL-16-CL-L 16 7/8" 10 3/16" 13'-2 13/16" 1'-9 7/16" 3'-10 7/16" 7'-0 3/4" 1'-9 1/4" 18.60 60” or > .063 alum. returns IL-18-CL-L 18 3/4" 11 5/16" 14'-8 7/16" 1'-11 13/16" 4'-3 9/16" 7'-10 3/16" 1'-11 5/8" 22.97 IL-22-CL-L 22 1/2" 1'-1 9/16" 17'-7 11/16" 2'-4 9/16" 5'-1 7/8" 9'-5 1/16" 2'-4 3/8" 33.08 18ga. PLTC WIRE IL-28-CL-L 28 1/4" 1'-5 1/16" 22'-1 13/16" 2'-11 7/8" 6'-5 11/16" 11'-9 15/16" 2'-11 5/8" 52.15 CRIMP CONNECTOR IL-33-CL-L 33 3/4" 1'-8 3/8" 26'-5 9/16" 3'-6 7/8" 7'-8 13/16" 14'-1 9/16" 3'-6 1/2" 93.86 IL-39-CL-L 39 1/2" 1'-11 7/8" 30'-11 11/16" 4'-2 3/16" 9'-0 5/8" 16'-6 7/16" 4'-1 3/4" 101.96 IL-45-CL-L 45 1/8" 2'-3 1/4" 35'-4 5/8" 4'-9 5/16" 10'-4 1/8" 18'-10 11/16" 4'-8 7/8" 133.06 3/16" THICK PLASTIC FACE Colors & Materials ALUMINUM BACK Channel Letter Key POWER SUPPLY 3/13/25 LED MODULE 12ga. STRANDED THHN PLASTIC BUSHING WIRE, FITTING, & STUD FOR ELECTRICAL GROUNDING CONDUIT (TO PRIMARY) JUNCTION BOX JUNCTION BOX ELECTRICAL CONDUIT & FITTING WIRE NUT Ø3/8" ALUMINUM RIV-NUT SILICONE CAULK (APPLIED TO ALL WALL PENETRATIONS) Ø5/16" DRAIN HOLE w/LIGHT BAFFLE (when necessary) Typical Section - Face Lit Letter Flush Mounted & Self Contained 2