Infill Incentive Plan
City of Mesa — Planning and Zoning Board - Public Hearing (2026-11-18)
Extracted text (via pymupdf_layout)
146724 characters
Page | i Table of Contents Table of Contents ii List of Maps iii List of Tables iii List of Charts iv Chapter 1 IIP Introduction 1 1-1: Purpose and Applicability. 1 1-2: Statement of Need. 2 1-3: Cultural Resources Context. 5 1-4: Vision and Goals. 6 Chapter 2 Zone Standards 8 2-1: Purpose. 8 2-2: Zone Standards. 8 Chapter 3 Land Use Regulations 18 3-1: Applicability. 18 3-2: Land Use Table. 18 Chapter 4 Development Standards 22 4-1: Purpose. 22 4-2: Applicability. 22 4-3: Architectural Standards. 22 4-4: Trash and Refuse Collection Standards. 25 4-5: Landscape Standards. 27 4-6: Lighting Standards. 30 4-7: Parking Requirements. 32 4-8: Signage Standards. 34 Chapter 5 Thoroughfare Standards 37 5-1: Purpose. 37 5-2: Applicability. 37 5-3: Design Considerations. 39 5-4: Thoroughfare Types. 40 Chapter 6 Open Space Standards 61 6-1: Purpose. 61 6-2: Minimum Open Space Requirements. 61 Page | ii 6-3: Private Open Space. 61 Chapter 7 Review and Development Procedures 64 7-1: Purpose. 64 7-2: Applicability of Culdesac Mesa IIP. 64 7-3: Development Plan Review and Permitting Process. 64 7-4: Development Plan Modifications. 68 7-5: Development Plan Expiration and Extensions. 69 7-6: Neighborhood Programming Process. 69 7-7: Interim Uses. 71 7-8: IIP Amendments. 75 Chapter 8 Definitions 77 8-1: Purpose and Applicability. 77 8-2: Land Use Definitions. 77 8-3: Specialized Terms and Phrases. 81 List of Maps Map 1-2.A — Existing and Future Context Map 2 Map 1-2.B — Existing Utilities 3 Map 1-2.C — Development Phasing Map 5 Map 2-1.A — Culdesac Mesa Regulating Map 8 Map 5-2.A — Conceptual Circulation Plan 38 Map 5-2.B — Contextual Pedestrian and Bike Circulation Plan 38 List of Tables Table 1-2.A — By-Passed Parcel Eligibility Criteria 3 Table 1-2.B — ID District Eligibility Criteria 4 Table 2-2.A — Neighborhood Zone Standards 8 Table 2-2.B — Village Zone Standards 11 Table 2-2.C — Campus Zone Standards 14 Table 3-2.A — Permitted Land Uses 19 Table 4-8.A — Maximum Height of Lighting Fixtures 31 Table 4-10.A — Signage Standards 35 Page | iii Table 5-4.A — Suburban Streets Standards 41 Table 5-4.B — Mixed-Use Streets Standards 42 Table 5-4.C — Local Streets Standards 46 Table 5-4.D — Shared Streets Standards 49 Table 5-4.E — Shared Lanes Standards 53 Table 5-4.F — Pathway Standards 56 Table 5-4.G — Curb Radii 58 Table 6-3.A — Civic Space Type Standards 62 Table 7-3.A — Pre-Submittal Conference Schedule 65 Table 7-3.B — Example Phase Compliance Tracking Table 66 List of Charts Chart 5-4.A — Allowed Thoroughfare Process 59 Page | iv Chapter 1 IIP Introduction 1-1: Purpose and Applicability. A. Purpose. The proposed ID-2 zoning district and Infill Incentive Plan (IIP) are intended to promote and facilitate the development of an underutilized 26-acre site on the edge of Downtown Mesa. These tools establish specific land uses, development standards, and streamlined review processes as incentives to stimulate reinvestment in a manner that will contribute to a high-quality context for homeownership, local business activity, and a compact, walkable neighborhood that reinforces the vitality of Downtown. The ID-2 District and IIP are employed here because conventional zoning tools available in the Zoning Ordinance are insufficient to fully address the redevelopment needs of this site. B. Applicability. The proposed ID-2 District and the corresponding IIP apply to the Culdesac Mesa Project (Site) located at the southwest corner of East University Drive and North Mesa Drive in Mesa, Arizona. The project site includes the following Assessor's Parcel Numbers: 138-61-053 thru 138-61-073, 138-61-074A, 138-61-076 thru 138-61-080, 138-61-096A, 138-62-002, 138-62-005A, 138-62-006 thru 138-62-009, 138-62-01l0A, 138-62- 012 thru 138-62-038, 138-62-039C, 138-62-040 thru 138-62-069, 138-62-070A, 138-62-070B, 138-62-071 thru 138-62-073, 138-62-074A, 138-62-075 thru 138-62-082,138-62-090A, 138-62-091, and 138-62-116 thru 138- 62-123, otherwise described as: That portion of the Northeast quarter of Section 22, Township 1 North, Range 5 East of the Gila and Salt River Base and Meridian, Maricopa County, Arizona, described as follows: COMMENCING at a 3 inch Brass Cap in hand hole at the intersection of University Drive and Mesa Drive marking the Northeast corner of said Section 22 from which a 3 inch Brass Cap in hand hole at the intersection of University Drive and Center Street marking the North quarter corner of said Section 22 bears North 89 degrees 52 minutes 36 seconds West, a distance of 2618.16 feet; THENCE South 00 degrees 24 minutes 11 seconds West, a distance of 213.50 feet along the East line of said Northeast quarter to the Easterly extension of the North line of the South 150.00 feet of Block 58, MESA CITY, recorded in Book 3 of Maps, page 11, records of Maricopa County, Arizona; THENCE North 89 degrees 56 minutes 06 seconds West, a distance of 67.75 feet along said Easterly extension to the Northeast corner of said South 150.00 feet and the POINT OF BEGINNING; THENCE South 00 degrees 18 minutes 28 seconds West, a distance of 478.57 feet along the East line of said Block 58 and Block 59 to the Easterly extension of the South line of Lot 7 of W. R. STEWART SUBDIVISION OF BLOCK 59, TOWN OF MESA CITY, recorded in Book 11 of Maps, page 17, records of Maricopa County, Arizona; THENCE North 89 degrees 45 minutes 08 seconds West, a distance of 128.86 feet to the Southwest corner of said Block 59; THENCE South 00 degrees 16 minutes 40 seconds West, a distance of 310.12 feet to the North line of 2nd Street as shown on W. R. Stewart Subdivision, recorded in Book 8 of Maps, page 11, records of Maricopa County, Arizona; THENCE North 89 degrees 43 minutes 16 seconds West, a distance of 1155.68 feet along said North line to the Southeast corner of Block 31, CITY OF MESA, recorded in Book 23 of Maps, page 18, records of Maricopa County, Arizona; THENCE North 00 degrees 19 minutes 31 seconds East, a distance of 757.53 feet along the East line of Pasadena Street to the Southwest corner of Tract C, CENTENNIAL WAY PLAT AMENDED, recorded in Book 283 of Maps, page 19, records of Maricopa County, Arizona; THENCE South 89 degrees 48 minutes 25 seconds East, a distance of 130.85 feet along the South line of said Tract C to the West line of the East half of said Tract C; THENCE North 00 degrees 18 minutes 45 seconds East, a distance of 176.73 feet along said West line to the North line of said Tract C; THENCE South 89 degrees 56 minutes 06 seconds East, a distance of 974.59 feet along said North line of said Tract C and the South line of University Drive to the monument line of Pomeroy Street; THENCE South 00 degrees 16 minutes 40 seconds West, a distance of 150.00 feet along said monument line to the Westerly extension of the North line of the South 150.00 feet of said Block 58; THENCE South 89 degrees 56 minutes 06 seconds East, a distance of 178.62 feet along said North line to the POINT OF BEGINNING. Page | 1 1-2: Statement of Need. A. Existing Context. The Site is located adjacent to the Downtown and has been vacant since the 2000s. Given the proximity and relationship to Downtown, the regulatory framework is based on Mesa’s Form Based Code to ensure consistency and continuity between the Site and Downtown. Map 1-2.A — Existing and Future Context Map Page | 2 Map 1-2.B — Existing Utilities B. Redevelopment Need. Despite efforts by the City of Mesa to develop the 26 +/- acre Site, it has remained vacant and unused since the 2000s. In the reevaluation of the Central Business District, the blight assessment study presented to City Council found the Site to contain multiple blight factors. C. Eligibility. Per Mesa City Code Title 11, Chapter 12, Section 2 (Mesa City Code Title 11 hereinafter referred to as “Mesa Zoning Ordinance”) in order to be eligible to use an ID District, a site must comply with the following: 1. Meet the definition of “by-passed parcel” without regard to lot size (as defined below) and; Table 1-2.A — By-Passed Parcel Eligibility Criteria Complies Definition Explanation Yes Has been in its current configuration for All parcels have been vacant for at least 30 more than 10 years. years according to historical aerial imagery. Page | 3 Yes Has direct access to existing utility Abundant utility distribution facilities shown distribution facilities. in Map 1-2.B — Existing Utilities Yes Surrounded by properties within a The percentage of developable land area 1,200-foot radius in which the total within this radius that is vacant is developable land area is not more than approximately 1%. 25% vacant. Yes Surrounded by properties within a All developable land within this radius was 1,200-foot radius in which greater than first developed over 15 years ago. 50% of the total number of lots or parcels have been developed 15 or more years ago. 2. Meet four (4) of the following six (6) applicability requirements: Table 1-2.B — ID District Eligibility Criteria Complies Applicability Criteria Explanation No There is a high percentage of vacant The Site is currently vacant and doesn’t older or dilapidated buildings or contain any buildings or structures. structures. Yes There is a high percentage of vacant or Every parcel is vacant and underused. Parcels underused parcels of property, obsolete will need to be replatted for redevelopment. or inappropriate lot or parcel sizes, buildings designed for obsolete land uses, or environmentally contaminated sites. Yes There is a high percentage of buildings According to data provided by the City of or other places where nuisances exist Mesa Office of Urban Transformation, Site 17 or occur. has generated 3,804 documented responses since 2023, including trash removal, homeless encampments, and drug paraphernalia collection. Incidents have increased 16% over two years—from 1,213 total in 2023 to 1,404 in 2025—with 2026 on pace to match or exceed that volume based on estimates through May 2026. Yes There is an absence of development and Downtown Mesa's residential base of aging investment activity compared to housing stock stands in stark contrast to the other areas in the City. 3,500+ units currently under development in outlying Mesa corridors such as Eastmark and Hawes Crossing. Page | 4 Yes There is a high occurrence of crime. There have been 117 drug paraphernalia incidents at the Site between 2023 and 2025, with the number increasing each year from 35 in 2023 to 43 in 2025. No There is a continuing decline in The Site already has zero (0) population. population. D. Project Phasing. 1. The project will be built in multiple phases, as described in Map 1-2.C — Development Phasing Map. 2. Each phase may be completed via multiple sub-phases. Map 1-2.C — Development Phasing Map 1-3: Cultural Resources Context. A. For purposes of this IIP, “cultural resources” means any significant historical, cultural, or archaeological features, artifacts, structures, sites, or resources located on or associated with the Site. B. The Site may contain cultural resources which merit additional investigation in accordance with MZO Section 11-12-5(A)(2). Prior to ground disturbing activities for each phase, the developer will retain a qualified archaeologist to conduct archaeological review for said phase; the results of which shall be reviewed by the City Historic Preservation Office in advance of each phase of development. If resources requiring preservation Page | 5 or mitigation are identified, appropriate actions will be coordinated with the Developer, City, and relevant agencies, according to applicable laws and regulations. C. Culdesac Mesa shall ensure compliance with all applicable Arizona statutes and regulations governing cultural resources. 1-4: Vision and Goals. A. Purpose. The following section establishes the Vision for developments within the IIP. This Vision is intended to guide site planning and building design, prioritizing public life and fostering a complete, integrated neighborhood that supports the health, vitality, and long-term prosperity of Downtown Mesa. It’s based on previous community engagement work including the Transform 17 conceptual plan’s guiding principles. B. Vision. Culdesac Mesa is designed for everyday living in the heart of Mesa. Rooted in Culdesac’s human- centered design philosophy, the neighborhood fosters a culture of belonging, cultivates thriving local economies, and advances transportation freedom. It is built to create opportunities for: 1. Families to buy new homes in Downtown Mesa; 2. Children to walk or bike to school; 3. Neighbors to know each other through shared courtyards, paseos, and gathering spaces; 4. Residents to start and support local businesses close to home; 5. Thoroughfares that prioritize walking, biking, and lingering; and 6. Landscape and shade systems that make outdoor life more comfortable for more of the year. This approach is grounded in a network of human-scaled spaces: a memorable central core, vibrant paseos as connectors, flexible community hubs, residential edges that support neighborhood bonds, and a green loop with integrated play and quiet moments of retreat. The result is a holistic neighborhood that feels distinctly Mesa—grounded in its history, arts, climate, and culture—while also being forward-looking and innovative. C. Vision Pillars. Culdesac Mesa is organized around seven vision pillars that guide planning, design, and implementation: 1. The American Dream, Updated. Expands access to homeownership within a compact, walkable neighborhood that reflects a more connected and sustainable future. 2. A Neighborhood That Listens. Embraces an iterative, community-informed approach that evolves through ongoing engagement and feedback. 3. Smart, Efficient Quality. Delivers durable, high-quality design through simple, thoughtful, and cost- effective strategies. Page | 6 4. Life in Concert with the Sonoran Desert. Responds to the desert climate with shaded, comfortable, and environmentally attuned outdoor spaces. 5. Place-Powered Social Fabric. Strengthens community through shared spaces designed to foster daily interaction and connection. 6. Neighborhood Shops, Steps from Regional Culture. Creates a local retail environment that serves daily needs while connecting to Downtown Mesa’s cultural corridor. 7. A Bridge to Tomorrow’s Autonomous Reality. Supports a car-lite lifestyle today while preparing for a more flexible, multimodal, and autonomous future. Page | 7 Chapter 2 Zone Standards 2-1: Purpose. A. Zones allocate the scale and intensity of development across the Site to create a cohesive neighborhood that is responsive to the surrounding context. Culdesac Mesa is organized around three (3) Zones that allow for a range of development intensities. B. The southern portion of the Site contains the least intense Zone, creating an appropriate transition to the taller and more intense Zones located in the center and along the northern edge of the Site. Map 2-1.A — Culdesac Mesa Regulating Map 2-2: Zone Standards. Table 2-2.A — Neighborhood Zone Standards 1. Zone Intent and Description Provides a high-quality, house-scaled neighborhood pattern that is primarily residential, while allowing limited flexibility to support small-scale commercial activity. This zone creates a compact, walkable environment composed of small-footprint buildings that reflect the scale, massing, and rhythm of a traditional neighborhood. The Neighborhood Zone serves as a transition between surrounding historic districts and existing neighborhoods and the more intense areas of Culdesac Mesa. Buildings are generally limited to three (3) stories and are organized along shorter blocks, further divided by pathways and lanes to enhance walkability and access. To encourage small business incubation, limited commercial uses may be integrated within live/work units that maintain a house-scaled form. Special events and interim uses may also be accommodated to activate the area Page | 8 early and provide opportunities for residents and business owners to shape the character and evolution of the neighborhood over time. 2. Building Placement Build-to Lines and Setbacks (Distance from property line/ROW) Street (1) 0’ min.; 25’ max. A Side (1) 0’ min. B and C Page | 9 Rear (1) 0’ min. D Build-to Lines Defined by a Building Front Street (1) 50% min. Side Street (1) 25% min. The Neighborhood Zone does not have lot size, frontage, or impervious/lot coverage requirements. 3. Building Form Height 3 stories max. E Block Length 400’ max. Blocks should be interspersed with Open Space, Private or Public Streets, Alleys or Private Driveways. 4. Parking See Chapter 4-7: Parking Requirements. for additional standards 5. Private Frontage Types Residential - Front Street Ground-level 15% min. See Chapter 4: Development Transparency (2) Standards for additional standards Commercial - Front Street Ground-level 35% min. Transparency (2) Footnotes: 1. Front and Side Street designation shall be determined for each parcel by developer at time of Development Plan submittal. Page | 10 2. Planning Director or designee may approve alternative public realm engagement designs that could include an outdoor patio, public art, outdoor sales/dining, or vertical landscape elements. Table 2-2.B — Village Zone Standards 1. Zone Intent and Description Creates a medium- to high-intensity, mixed-use neighborhood that serves as the social and commercial heart of Culdesac Mesa. This zone is organized as a compact, block-scaled environment with a mix of housing, shops, restaurants, live-work spaces, and community-serving uses arranged along a connected network of streets and public spaces. Buildings are designed to define a continuous, pedestrian-oriented public realm, with minimal setbacks, frequent entrances, and active ground-floor uses that reinforce a vibrant street environment. Heights generally range from four (4) to 12 stories, scaled to frame streets and civic spaces with a strong sense of enclosure, shade, and urban character. Commercial spaces are intended to support the establishment, growth, and long-term viability of local businesses. Public spaces are designed to accommodate markets, events, and community gatherings that serve residents while also attracting visitors from the surrounding area and the broader region. 2. Building Placement Page | 11 Build-to Lines and Setbacks (Distance from property line/ROW) Front Street (1) 0’ min.; 10’ max. (2) A Side Street (1) 0’min., 15’ max. (2) B Side 0’ min. C Rear 0’ min. D Build-to Lines Defined by a Building Front Street (1) 65% min. Side Street (1) 40% min. The Village Zone does not have lot size, frontage, or impervious/lot coverage requirements. 3. Building Form Height 12 stories max. E Page | 12 Commercial building over three stories - 12’ min. F Ground Floor Ceiling Residential building over three stories - 10’ min F Ground Floor Ceiling Block Length 400’ max. Blocks should be interspersed with Open Space, Private or Public Streets, Alleys or Private Driveways. 4. Parking Location (Distance From Property Line/ROW) Front Street Setback (1) Ground Floor 20’ min. G Upper Floors 0’ min. G Side Street Setback (1) Ground Floor 10’ min. H Upper Floors 0’ min. H Side 0’ min. J Rear 0’ min. K See Chapter 4-7: Parking Requirements. for additional standards 5. Private Frontage Types Residential - Front Street Ground-level 30% min. See Chapter 4: Development Transparency (1) (3) Standards for additional standards Page | 13 Residential - Side Street Ground-level 20% min. Transparency (1) (3) Commercial - Front Street Ground-level 70% min. Transparency (1) (3) Commercial - Side Street Ground-level 35% min. Transparency (1) (3) Footnotes: 1. Front and Side Street designation shall be determined by developer at time of Development Plan submittal. 2. Setback may be increased to 25’ maximum for outdoor dining. 3. Planning Director or designee may approve alternative public realm engagement designs that could include an outdoor patio, public art, outdoor sales/dining, or vertical landscape elements. Table 2-2.C — Campus Zone Standards 1. Zone Intent and Description Creates a high-intensity, pedestrian-oriented district that supports the long-term expansion of higher-education and other uses in Mesa, including student housing and complementary academic, institutional, civic, and mixed- use development. This zone accommodates the tallest buildings on the Site, including high-rise forms, within a compact, block-scaled environment defined by interconnected streets, active ground floors, and integrated open spaces. Development within the Campus Zone is intended to establish a distinctive district character that supports campus life, student activity, and a high concentration of residents and uses in a highly walkable urban setting. Building frontages shall reinforce a cohesive public realm, while larger building forms should be designed to maintain pedestrian comfort through articulation, shading, and thoughtful massing. A wide range of residential, academic, commercial, and institutional uses is permitted to support the evolving needs of the Site and the surrounding community. Page | 14 2. Building Placement Build-to Lines and Setbacks (Distance from property line/ROW) Front Street (1) 0’ min.; 10’ max. (2) A Side Street (1) 0’min., 15’ max. (2) B Side 0’ min. C Rear 0’ min. D Build-to Lines Defined by a Building Front Street (1) 60% min. Page | 15 Side Street (1) 40% min. The Campus Zone does not have lot size, frontage, or impervious/lot coverage requirements. 3. Building Form Height No Max. E Ground Floor Ceiling - Commercial 12’ min. F Ground Floor Ceiling Residential 10’ min F Block Length 400’ max. Blocks should be interspersed with Open Space, Private or Public Streets, Alleys or Private Driveways. 4. Parking Location (Distance From Property Line/ROW) Front Street Setback (1) Ground Floor 20’ min. G Page | 16 Upper Floors 0’ min. G Side Street Setback (1) Ground Floor 10’ min. H Upper Floors 0’ min. H Side 0’ min. J Rear 0’ min. K See Chapter 4-7: Parking Requirements. for additional standards 5. Private Frontage Types Residential - Front Street Ground-level 30% min. See Chapter 4: Development Transparency (1) (3) Standards for additional standards Residential - Side Street Ground-level 20% min. Transparency (1) (3) Commercial - Front Street Ground-level 70% min. Transparency (1) (3) Commercial - Side Street Ground-level 35% min. Transparency (1) (3) Footnotes: 1. Front and Side Street designation shall be determined by developer at time of Development Plan submittal. 2. Setback may be increased to 25’ maximum for outdoor dining. 3. Planning Director or designee may approve alternative public realm engagement designs that could include an outdoor patio, public art, outdoor sales/dining, or vertical landscape elements. Page | 17 Chapter 3 Land Use Regulations 3-1: Applicability. A. Use classifications describe one (1) or more uses of land having similar characteristics, but do not list every use or activity that may appropriately be within the classification. B. If a proposed use or activity is not explicitly listed in this Chapter, the Planning Director or designee has the authority to: 1. Determine whether the proposed use or activity is within or equivalent to a use specifically listed in this Chapter; or 2. Not within or equivalent to any use specifically listed in this Chapter. C. When making its determination, the Planning Director or designee may consider among other things: 1. Whether the characteristics and impact are similar to, and substantially compatible with, a use specifically listed in this Chapter (for example: scale, function, noise, traffic); 2. Any incompatibilities or greater impacts; 3. How the proposed use functions within the building; 4. Future reuse or redevelopment of the building; and 5. Industry terms or definitions in other Chapters of the Zoning Ordinance. D. If the Planning Director or designee determines a proposed use or activity is within or equivalent to a use listed in this Chapter the proposed use or activity will be treated in the same manner as the use it is deemed to be within or equivalent to, and the same requirements for the use under the applicable zoning district will apply such as Land Use Regulations, Development Regulations including Standards for Specific Uses and Activities, and Administrative Regulations. 3-2: Land Use Table. A. Table 3-2.A — Permitted Land Uses provides the land use regulations for all Zones. 1. "P" designates permitted uses. 2. "(x)" a number in parenthesis refers to the limitation following the table. 3. "-" designates a prohibited use. Page | 18 Table 3-2.A — Permitted Land Uses Land Use Neighborhood Village Campus Recreation & Civic Uses Community Services P P P Hospital - P P Medical/Dental Clinic P P P Medical/Dental Office P P P Meeting Facility, Public or P P P Private Place of Worship P P P Public Safety Facility - P P Recreation Facility† P P P Schools & Cultural Institution Uses K-12 School, Public or Private P P P Library; Museum <2,500sf* P P P Library; Museum >2,500sf* - P P Post-Secondary Institutions, - P (1) P (1) Public or Private Studio < 5,000 sf with or P P P without outdoor display* Studio > 5,000 sf with or - P P without outdoor display* Theater, cinema or performing - P P arts Residential Uses Accessory Dwelling Unit - P P P detached or attached Community Residences P (2) P (2) P (2) Home Occupation P (3) P (3) P (3) Live/Work <2,500 sf* P (3) P (3) P (3) Live/Work >2,500 sf* - P (3) P (3) Page | 19 Land Use Neighborhood Village Campus Middle Housing P (4) P (4) P (4) Multi-Unit Residence P P P Overnight Living/Care Facility P P P Single-Unit Residence - P P P attached Single-Unit Residence - P - - detached Commercial Uses (3) (5) (6) Day Care Facility P P P Eating and Drinking P (7) P (8) P (8) Establishment < 5,000 indoor sf with or without outdoor dining* † Eating and Drinking - P (8) P (8) Establishment >5,000 indoor sf with or without outdoor dining* † General Retail < 5,000 sf with P (7) P (8) P (8) or without outdoor display* General Retail > 5,000 sf with - P (8) P (8) or without outdoor display* Lodging <50 keys P P P Lodging ≥50 keys - P P Office <2,500 sf* P P P Office >2,500 sf* - P P Plant Nursery† P P P Pop-Up Market† P P P Urban Agriculture† P P P Transportation Uses Mobility Hub† P (9) P (9) P (9) Page | 20 Land Use Neighborhood Village Campus Parking Facility as Primary Use† P P P Temporary Parking Lot P P P Footnotes 1. Shall not emit any of the following, detectable at the property line: unpleasant odor, dust, smoke, gas, fumes, excess noise above 75db, perceptible vibrations, and glare. 2. Per the requirements of Section 11-31-14 (Community Residences) of the MZO. 3. Onsite production of items sold is permitted. Production shall not emit any of the following, detectable at the property line: unpleasant odor, dust, smoke, gas, fumes, excess noise above 75db, perceptible vibrations, and glare. 4. Per the requirements of Section 11-31-38 (Middle Housing) of the MZO. 5. Pick-up window facilities are permitted, provided they are walk up only. No drive-up or drive-thru facilities. 6. Providing entertainment is permitted. Outdoor entertainment shall be approved with Neighborhood Programming Plan. 7. Outdoor space for retail or services use may occupy 500 square feet in addition to indoor space. Outdoor space for an eating establishment may occupy up to 3,000 square feet in addition to indoor space. Outdoor retail, services, or eating establishments do not need an accompanying indoor space. 8. Outdoor space for retail or services use may occupy 1,000 square feet in addition to indoor space. Outdoor space for an eating establishment may occupy up to 5,000 square feet in addition to indoor space. Indoor space may be as small as 0 square feet. 9. No more than 20 carshare cars allowed. No fueling stations or car washes permitted. * Where size thresholds are defined in this Ordinance, they shall apply to the gross floor area of an individual tenant space or establishment, and not to the aggregate floor area of multiple establishments within a building or development. † Allowed prior to construction on any part of the Site. After CofO for the area where the use is occurring, the use is allowed as shown in development plans. Page | 21 Chapter 4 Development Standards 4-1: Purpose. A. This Chapter establishes the development standards for the IIP. These standards are intended to guide site planning and building design, with an emphasis on prioritizing public life and create a complete, integrated neighborhood that supports the health, vitality, and long-term prosperity of Downtown Mesa. B. A successful urban neighborhood depends on the thoughtful relationship between buildings, thoroughfares, and civic spaces. Accordingly, these standards focus on the physical form and spatial organization of development to ensure that blocks, streets, frontages, and building massing work together to create a durable and high-quality urban environment. 4-2: Applicability. A. The standards within this Section shall apply to all proposed development within IIP and shall be considered along with the standards for the applicable Zones in Chapter 2: Zone Standards and Chapter 3: Land Use Regulations. B. This Chapter replaces all development standards within the City of Mesa Zoning Ordinance. 4-3: Architectural Standards. A. Architectural Detailing. 1. Buildings shall incorporate architectural detailing on all elevations to create visually engaging structures that contribute positively to the pedestrian environment and overall development character. 2. Buildings shall maintain a clear architectural relationship with surrounding structures through coordinated materials, colors, and design elements while still allowing for visual variety within the development. 3. All buildings shall be designed with special attention given to facades visible from public streets, pedestrian pathways, and public open spaces. 4. Areas not visible from public view, including service areas, loading docks, and elevations behind screen walls, may include simplified detailing but shall maintain a consistent overall design quality. 5. The design of building vents, rain collection, and other mechanical systems visible from public rights-of- way shall be architecturally considered to create cohesive facades. 6. Public art may be incorporated into the development, in locations including but not limited to building facades, shade structures, pavement patterns, landscape design, and utility housings. B. Articulation. 1. Publicly visible facades shall include an appropriate level of articulation, detailing, material variation, and design treatment. Page | 22 2. All buildings shall delineate stories through the use of expansion joints, belt course masonry, or a change in exterior material. C. Windows and Transparency. 1. Street-facing facades shall incorporate windows, doors, and other transparent elements intended to strengthen the visual connection between buildings and adjacent sidewalks, pedestrian pathways, and open space. 2. Retail and other active-use frontages shall incorporate transparent storefronts, display windows, and entrances to strengthen the relationship between buildings and adjacent pedestrian areas. D. Building Entrances. 1. Buildings shall be designed with entrances that are visible, easily identifiable, and accessible. 2. Buildings shall be oriented toward public streets, walkways, or common open spaces to enhance street presence and encourage pedestrian activity. 3. Each building shall provide a primary pedestrian entrance that connects directly to pedestrian walkways, public sidewalks, or transit stops where applicable. 4. Entrance Design. a. Entrances shall be architecturally integrated into the overall building design and shall incorporate design elements such as canopies, roof projections, recessed entries, porches, or similar architectural features that emphasize the entrance and provide pedestrian-scale detailing. b. Landscape, paving, and other elements shall be used to provide visual cues that guide pedestrians to building entrances. c. Multi-family residential buildings may share common entrances serving multiple units; however, clear pedestrian access shall be maintained. Ground-level entrances are encouraged where feasible. E. Shade Elements. Architectural elements such as awnings, canopies, recesses, arcades, or similar features shall be used where appropriate to provide shade, shelter, and visual interest along building facades. F. Yard fencing. Yards fenced with a material 50% or more opaque which is at least 6 feet tall shall provide at least two (2) framed views, where an area of at least one (1) square foot of transparent material or void shall be located at a height of at least two (2) and no more than six (6) feet within the fence. G. Screening. 1. Landscape, public art, or similar improvements should be used to screen or beautify parking lots, utilities and other mechanical equipment in view from public rights-of-way. On-street parking is not expected to be screened. 2. Rooftop Equipment & Screening. Page | 23 a. Rooftop equipment shall be integrated into the building design and screened to ensure it is not visible from adjacent public streets, pedestrian pathways, or shared open spaces. b. Roof-mounted equipment shall be screened by a continuous, unified screening structure, which may be a parapet wall, that encloses all equipment as an integrated element or by separate screens which are well-integrated into the building’s architecture. 3. Roof Mounted Solar Panels. a. Solar panels and other alternative energy systems, where included, shall be incorporated into the building's roof design in a visually appealing manner, without detracting from the overall architectural style. b. Solar panels mounted on sloped roofs shall be fully contained within the roof's surface. Solar panels placed flush on sloped roofs do not require additional screening. c. For flat roofs, solar panels placed behind parapets shall follow the height limits outlined in this IIP and include screening that covers at least 60% of the visible surface. Parapets may be used as screening. d. Solar panels integrated into rooftop shade structures, including those located on parking structures, are permitted and shall be considered part of the building design. Such structures shall be designed to be architecturally integrated and shall not be subject to freestanding structure limitations. 4. Roof Access Ladders and Fire Sprinkler Risers. a. Roof access ladders and fire sprinkler risers shall be located within the building in buildings with four (4) or more stories. Roof access ladders and fire sprinkler risers may be located exterior to buildings three (3) stories or less when integrated into the architectural design of the building through the use of design elements such as but not limited to materials, colors, screening, etc. or when not visible from adjacent public streets. b. Exceptions. i. The Planning Director or designee may grant exceptions where it can be demonstrated that locating the items internally is not feasible. ii. When an exception is granted, roof access ladders or fire sprinkler risers shall be integrated into the architectural design of the building through the use of design elements such as but not limited to materials, colors, screening, etc. 5. Screening Ground Mounted Equipment. a. Electrical distribution equipment shall be permitted to be located between the building and the public right-of-way, or within the public right-of-way. b. If the equipment faces public streets or pedestrian areas, the screening shall extend at least 12-inches above the tallest piece of equipment. Page | 24 c. Screening and beautification shall consist of public art, decorative walls, and/or berms with a 2:1 maximum slope, supplemented by plant materials such as trees, shrubs, and groundcover. d. For screening walls that are three (3) feet or lower, up to 100% of the screening may be provided by vegetative materials instead of walls. e. Electrical transformers may be painted in lieu of physical screening (such as walls, landscaping, or enclosures), subject to the approval of the Planning Director or designee upon a finding that the proposed transformer painting provides equal or superior design elements than the standards of this Subsection, and otherwise meets the intent of the screening requirements. 6. Screening Wall Mounted Equipment. a. Wall-mounted equipment, such as electrical meters, electrical distribution cabinets, Service Entry Sections (SES), fire sprinkler equipment, and similar valves or cabinets, shall be screened when facing a street or public parking area and not recessed or separated from the street by intervening buildings, unless prohibited by Mesa Electric. b. Wall mounted equipment shall maintain clearance for access, per utility company requirements. c. Screening devices shall incorporate elements of the building's design, including the shape, color, texture, and material to ensure a seamless visual integration with the structure. 7. Exceptions to the screening requirements may be approved by the Planning Director or designee when it can be demonstrated that the mechanical equipment will not be visible from public view. 4-4: Trash and Refuse Collection Standards. A. Location. 1. Single Trash Facilities. a. Single Trash Facilities are permitted to be located within required setbacks. Where trash and recycling facilities are located within required setbacks, they shall be enclosed in a permanent structure. Said structure may also include other service facilities such as mailboxes and bicycle parking. Said structures shall be architecturally integrated into the broader development. b. Storage areas may be immediately adjacent to, but shall not infringe upon fire lanes, emergency access routes, drive aisles, or other areas required for fire protection or public safety access. 2. Shared Trash Facility Location. a. Trash and recycling storage areas shall be located outside required setback areas and shall not be placed near primary building entrances or pedestrian gathering areas where they would create visual or operational conflicts. Page | 25 b. Storage areas shall not interfere with fire lanes, emergency access routes, drive aisles, or other areas required for fire protection or public safety access. c. Compactors shall be located where they are accessible to the large majority of users within the development and where higher volumes of solid waste are anticipated, typically in areas with higher traffic and development intensity. 3. Shared Trash Facility Standards. Shared trash facilities shall: a. Be a minimum of six (6) feet in height and may be increased up to a maximum of 10 feet where necessary to fully screen equipment, address operational needs, or respond to the urban scale and intensity of development; b. Be constructed of solid masonry or concrete tilt-up with a decorative finish compatible with the primary structure; c. Include decorative, solid, heavy-gauge metal gates or metal-framed gates with view-obscuring material; d. Provide walk-in pedestrian access at least three (3) feet in width when serving residential projects; and e. Include concrete curbs or equivalent barriers to protect the enclosure from adjacent vehicle parking and traffic. 4. Orientation. a. Shared Trash Facility enclosure openings shall be oriented away from public rights-of-way where feasible. b. Gates visible from streets or public parking areas shall include latching mechanisms to ensure they remain closed. B. Lighting. 1. Shared Trash Facilities shall be illuminated to provide a minimum of one (1) foot-candle of illumination for safety and operational visibility. 2. Single Trash Facilities shall be illuminated consistent with the buildings they serve based on applicable Mesa Residential or Mesa Building Code, as adopted. C. Landscaping. 1. Where feasible, the perimeter of enclosures shall incorporate drought-tolerant landscape planting, including shrubs or climbing vines, to soften the appearance and enhance site integration. 2. Tree canopies shall not create overhead obstructions of Shared Trash Facilities. Page | 26 D. City Standards. Shared Trash Facility enclosures shall comply with applicable City solid waste requirements, including the City of Mesa M-1101 Standard Details, or other designs as approved by City Engineer. 1. The location and design of all trash and solid waste enclosures shall be shown on development plans and building permit plans and shall be maintained in good condition. 2. Alternatives to standard enclosure requirements may be considered by the Solid Waste Director or designee, provided the alternative meets applicable safety and operational standards. 4-5: Landscape Standards. A. Irrigation Systems. Irrigation systems shall be underground automatic watering systems, unless the lot is served by functioning flood irrigation. B. Paving and Hardscape Materials. Paving and ground treatment shall be an integral part of site and landscape design. 1. Hardscape materials include, but are not limited to, decorative concrete, textured concrete, pavers, natural or composite stone, or other comparable materials consistent with the overall design character of the development. 2. Variations in paving materials, patterns, textures, and colors shall be used to define pedestrian areas, gathering spaces, plazas, crossings, seating areas, and other activity zones. 3. Alternative paving materials including but not limited to stabilized decomposed granite, porous or permeable pavers, and precast pavers are permitted. C. Retention Basins. 1. Stormwater collection. Cross-lot overland stormwater discharge is permitted within a permanent access and maintenance easement. 2. Design. a. Retention basins may be any shape and shall be designed as an integral part of the overall landscape design. b. Retention basin design should holistically achieve site stormwater management objectives through a system of interconnected basins, rather than a single large facility. c. Retention may also be achieved through alternative systems as approved by the City Engineer or designee. 3. Depth. The maximum water depth within retention basins shall not exceed three (3) feet six (6) inches unless approved by the City Engineer or designee. 4. Retaining Walls. Page | 27 a. Retaining walls may comprise up to 100% of the basin perimeter and shall not exceed four (4) feet in height, measured from the bottom of basins. b. When required, fall protection shall be provided in accordance with the International Building Code, as amended. c. Retention Basins Along Public Streets. Retention basins located along public streets that incorporate retaining walls shall include catch basins and piping to convey stormwater to the bottom of the basins. i. No minimum berm is required. Where berms are provided, they shall not exceed two (2) feet in height and shall have a maximum slope of 4:1 (horizontal-to-vertical). ii. Within the public right-of-way, berms shall have a maximum slope of 6:1. Berms shall not obstruct run-off from streets into the retention basin. 5. Landscaping. The bottom of all retention basins shall be landscaped. Where retention basins are sloped, slopes shall be landscaped. a. Plant materials located within retention basins shall consist primarily of low-water-use, drought- tolerant, and basin-tolerant species appropriate for periodic inundation and long-term maintenance. b. Planting within retention basins shall be arranged to maintain visibility, preserve drainage function, and allow for maintenance and access to drainage infrastructure. c. Basin edges may include trees, shrubs, and groundcover that complement the surrounding landscape design. 6. Integration with Open Space. a. Retention basins may include pedestrian pathways, seating areas, or other passive open space elements where consistent with drainage design and City engineering requirements. b. Integrated open space and recreational features shall not impede the operational performance or maintenance requirements of the retention basin system. D. Species. All on-site landscape shall consist of native, or desert adapted species as included in the Arizona Department of Water Resources Active Management Plan Low Water Use Plant List for Phoenix. The Planning Director or designee may approve other plant species. 1. Shrubs. a. Required shrubs shall have a minimum mature growth height of 18-inches. b. At least 50% of required shrubs shall be a minimum of five (5) gallons in size upon installation, but in no case shall any shrub be less than one (1) gallon in size. 2. Trees. Page | 28 a. A minimum 25% of public and private open spaces shall be shaded at noon at spring equinox by buildings, shade structures, or trees, when trees are at full maturity, excluding active recreation facilities like sports fields. b. Tree species, size, height, and canopy shall be appropriate to the scale of adjacent buildings, streets, pedestrian areas, and open spaces. c. Trees shall be a minimum of 7-gallon trees. A minimum of 50% of the total required trees shall be 15- gallon or larger trees, and a minimum of 20% of the total required trees shall be 24-inch or larger box trees. 3. Living Turf and Artificial Turf. Living turf and artificial turf is appropriate in the following areas where it serves a functional and beneficial purpose: a. Turf can be used in active recreational areas such as sports fields, playgrounds, and communal play areas to provide a soft, functional surface for outdoor activities. b. Turf is suitable for designated play areas providing a safe and enjoyable environment for children’s activities. c. Turf is allowed in pet-friendly spaces, offering durable and usable surfaces in both private residential yards and common areas. d. Turf can be installed in private yards where it serves a practical function for residents. e. Turf may enhance pedestrian areas such as courtyards, plazas, and gathering spaces, adding greenery and usability while supporting a welcoming, pedestrian-friendly environment. E. Corners and Site Entrances. Landscaping at primary entries into the Site and into individual development areas shall incorporate coordinated plantings, landscape groupings, and complementary hardscape elements that frame views into the Site and contribute to a sense of arrival. 1. Primary vehicular site entrances shall be defined by at least one (1) species of plant with a mature height exceeding 48 inches, at least one (1) species of plant with a mature height exceeding 24 inches, and at least two (2) species of plants with mature heights under 24 inches. This combination is intended to emphasize the corners and entrances to the property. Freestanding signs may be incorporated, as regulated in this IIP’s signage standards, to announce arrival at Culdesac Mesa. 2. Planting at corners and entry locations shall be designed to maintain appropriate visibility and sight distance for vehicles and pedestrians. F. Landscaping in Public Utility Easements (PUFEs). 1. Trees may be located within Public Utility Easements (PUEs), provided that their placement does not interfere with utility infrastructure, access, or maintenance operations. 2. Tree species selected for PUE areas shall have non-invasive root systems and growth habits compatible with overhead or underground utilities. Page | 29 3. Final tree placement and species selection shall ensure compliance with utility clearance requirements and allow for future access. 4. Where conflicts arise, tree placement or species may be adjusted at site plan review as required by the utility provider to ensure safe and continued service. G. Landscaping Within Sight Visibility Clear Zones. 1. Shrubs, groundcover plant material, and inert ground cover materials, shall not exceed 30-inches in height at maturity. 2. Tree canopies shall be maintained to provide a minimum clearance of eight (8) feet over the sidewalk. 3. Tree canopies over roadways shall be maintained to a minimum 14 feet clearance. 4. Trees within sight visibility triangles (SVT) shall be a single trunk variety with a diameter of no more than 12 inches at full growth. 5. Any trees that are to be located within SVTs must be reviewed and approved by the Transportation Department. 4-6: Lighting Standards. A. Applicability. The requirements of this Section shall apply to all projects except Single-Unit Residence- attached and -detached. B. City code. All lighting shall comply with the standards found in the Mesa Lighting and Electrical Code, Title 4, Chapter 4 of the Mesa City Code. Project-specific public street, private street, and pathway lighting fixtures may be used to meet lighting requirements. C. Parking Lot Illumination. 1. Light standards shall be located only within the parking area or, where permitted, the outdoor storage area, and shall not encroach into required perimeter landscape areas. 2. House-side shields shall be provided on all light standards adjacent to residential uses. 3. Building mounted lights shall maintain the same heights as specified in Table 4-6.A — Maximum Height of Lighting Fixtures. 4. For additional standards refer to the Mesa Lighting and Electrical Code; Title 4, Chapter 4 of the Mesa City Code. D. Maximum Height of Lighting Fixtures. Lighting fixtures, including freestanding light poles as well as building- mounted lights, shall not exceed the maximum heights specified in Table 4-6.A — Maximum Height of Lighting Fixtures. Page | 30 Table 4-6.A — Maximum Height of Lighting Fixtures Zone Maximum Height (ft) - Detached Maximum Height (ft) - Attached Neighborhood 15 Not to exceed the peak elevation of the immediately adjacent sloped Village 16 roof, parapet, or building elevation to which the fixture is attached Campus Within 50 feet of any street frontage: 20 ft. Within 50 feet of a residential district: 15 ft. Any other location: 25 ft. E. Exceptions. 1. Exceptions to the maximum height of lighting fixtures may be approved by the Planning Director or designee, after a review of a photometric study. 2. Such exceptions may include requirements for light control devices, such as fully shielded or full cut-off fixtures, to reduce glare and light-spillage onto abutting properties. F. Exposed Exterior Building Illumination. 1. Exposed neon, argon, krypton, or LED tubing is permitted solely in advertising signs and public art and is prohibited for all other uses. 2. Such signs may be illuminated only during the hours the associated business is open to the public or as specified in a Neighborhood Programming Plan or Interim Use Plan. G. Control of Light Trespass. Project lighting shall be designed to minimize glare and light trespass from the project Site to adjacent residential properties. H. Maximum Light Spillage. For light spillage, the light level at the boundary of the project, measured 36-inches above ground level, shall be not more than 0.5 foot candles (5 Lux) above ambient light level. I. Illuminate Pedestrian Paths and Shared Spaces. Shared Lanes, Shared Streets, and Pathways connecting the project to the public sidewalks, buildings on the same project, and the public pedestrian entry of buildings shall be illuminated during the twilight and evening hours the project is active and open to the public. These thoroughfare types may be lit by residential lighting and do not require streetlights. J. Consistent Fixture Design. Fixture designs used shall be harmonious with the building design, and with the architectural theme of the overall project, including multiple building projects. Page | 31 K. Gradual Transition of Exterior Lighting Levels. The relative brightness of light used may vary throughout the project, provided the transition from higher levels to lower levels of illumination shall be gradual, without extreme or abrupt degrees of change between higher levels of illumination and natural ambient darkness. L. Highlight Building Entries. Where exterior accent lighting is provided, focus attention on primary entries to buildings with illumination directed to highlight the entry and adjacent architectural details. Generally, lighting levels at the primary public entry shall be higher than lighting levels away from the public entry. M. Lighting to Enhance Building Design. Where exterior accent lighting is provided, lighting shall embellish nighttime architecture by illuminating activity areas, calling attention to details of the building design; and highlighting the relief of building features and/or the texture of building materials and/or landscape materials. N. Accent Lighting. Accent lighting may be used to highlight public art, water features, or significant architectural elements, provided it enhances aesthetics without contributing unnecessarily to light pollution. 4-7: Parking Requirements. A. Vehicle Parking. A minimum of 800 off-street parking spaces will be provided across the entire Site. Each phase of development, as identified in Map 1-2.C — Development Phasing Map, shall provide the following minimum number of parking spaces at that phase’s construction completion: 1. Phase I. A minimum of 140 off-street parking spaces. 2. Phase II. A minimum of 250 off-street parking spaces. Parking spaces exceeding minimum requirements in Phase I shall be applied to minimums for Phase II. 3. Phase III. A minimum of 425 off-street parking spaces. Parking spaces exceeding minimum requirements in Phase II shall be applied to minimums for Phase III. B. Parking Conversion. After an individual phase or sub-phase’s construction, parking spaces may be used as parking for any use in the IIP project area or may be converted for use as outdoor seating, private courtyard or porch space, pocket parks, outdoor sales, public plaza space, bike or bike share parking, or carshare parking. Parking spaces may be converted for other uses as approved by the Planning Director or designee. C. Vehicle Parking Space Design. 1. All parking spaces must be accessed from a public or private vehicular path. 2. Except for required accessible parking spaces, no parking spaces shall be required to be individually accessible. 3. Tandem, stacked, and valet parking may be used to meet parking requirements. 4. Parking spaces may be directly accessed from an alley. 5. On lots adjacent to an alley, all parking areas may be accessed only from the alley. Page | 32 6. On corner lots, all parking areas may be accessed only from the alley or side street. 7. Shared drives are encouraged between adjacent lots to minimize curb cuts along the street. Multiple parking spaces may be accessed via a single curb cut. 8. Parking spaces are not required to be covered. 9. Off-street parking spaces may not encroach on a sidewalk. Parking stalls may include a maximum of two and one half (2.5) feet of vehicle overhang at wheel stop/curb if that overhang does not encroach on a sidewalk. 10. Underground parking may be placed up to the right-of-way or property line. 11. Underground parking shall not be visible to pedestrians from a public way. 12. If park-lifts or mechanically-ventilated garages are used next to residential uses, the noise and vibration of the mechanical systems shall be mitigated. 13. Off-street surface parking areas that front a street or civic space and are not screened by buildings shall be screened at the right-of-way by a hedge, fence, or wall at least 42 inches in height and consistent in character with the primary building. 14. All exposed structured parking shall have an architecturally composed facade. 15. Temporary parking lots that will be replaced by a permanent building or structure are not subject to the parking regulations in Chapter 2: Zone Standards, nor shall comply with all landscaping requirements. 16. At least 10% of the area of an off-street parking with more than 30 spaces shall be reserved for landscaping. 17. Off-street surface parking lot landscaping requirements. a. Parking lot landscape islands shall be installed at each end of a row of stalls and in between for maximum 10 contiguous parking spaces. b. Landscape islands shall be a minimum of six feet wide and 15 feet in length for single-row and 30 feet in length for double-row parking. All measurements are to face of curb. c. Landscape islands may be eliminated when a conflict with the covered parking canopy occurs. D. Bicycle Parking. 1. One (1) secure indoor bicycle parking space shall be provided for every five (5) units of multi-unit residences. 2. One (1) bicycle parking space shall be provided per unit in the Neighborhood Zone. 3. Each bicycle parking space shall be one of the following: Page | 33 a. At least 18-inches wide, at least six (6) feet long, and with at least three and one half (3.5) feet of vertical clearance, dropping to two and one half (2.5) feet of vertical clearance for the last one (1) foot of length. b. At least 18-inches wide, at least three and one half (3.5) feet long, and with at least six (6) feet of vertical clearance. 4. Bicycle racks shall be securely anchored, allowing both the frame and wheels to be locked. Bicycle parking in private or indoor spaces may not require a bicycle rack. 5. Outdoor bicycle parking shall be placed in well-lit, visible areas near building entrances without obstructing pedestrian circulation. 4-8: Signage Standards. The following standards apply based on the underlying Zone to ensure signage remains “at scale” with its surroundings. A. Applicability. 1. This Section applies to all signage within the project area. 2. This Section allows and does not limit temporary and directional signage, public art, murals, wayfinding elements, or placemaking features. B. Permitted Signs. 1. Building-attached: a sign that is either: a. Perpendicular to the building face, hanging from or supported by a fixed mount. b. Coplanar to the building face. 2. Freestanding: Sign that is fixed to the ground. C. Prohibited Signs. 1. Snipe Signs: Signs tacked to trees, utility poles, or fences. 2. Animated/Flash Signs: Signs with moving parts or high-frequency flashing lights that could distract passersby. D. Sign Illumination. 1. External illumination shall be directed downward and shielded to avoid glare on adjacent properties. 2. Illuminated signs shall be dimmed in accordance with City regulations where they would otherwise impact residential areas. Page | 34 Table 4-8.A — Signage Standards Max Size of Sign Permitted Copy, not Zone Height / Clearance Type including backing (per user) 7' min. clearance height if hanging over sidewalk, 3' max. horizontal projection from building face, sign may not exceed the Building- Neighborhood 15 sf height of the tallest part of the building it’s attached to without attached Planning Director or designee approval. Two (2) signs permitted per user. 7' min. clearance height if hanging over sidewalk, 5' max. Building- horizontal projection from building face, sign may not exceed the 36 sf Village and attached height of the tallest part of the building it’s nearest to without Campus Planning Director or designee approval. Freestanding 120 sf 7' min. clearance height if hanging over sidewalk, 14' max. height. E. Neighborhood Zone Provisions for All Sign Types. 1. In Neighborhood Zones, signage shall be limited to one (1) small hanging sign and one (1) small coplanar sign per user. 2. Hanging signs shall be attached to a decorative bracket or porch ceiling. 3. Ground floor retail spaces shall incorporate exterior signage identifying the retailer. 4. Signs may have backing or may comprise individual letters. 5. Signage may be illuminated. 6. Signage shall not include electronic message displays. F. Village & Campus Zone Provisions for All Sign Types. 1. Purpose. a. Village. Focuses on pedestrian-scale commercial signs that do not overwhelm the "Main Street" feel. b. Campus. Designed for the highest intensity, allowing for larger wall signs and increased illumination levels. 2. Ground floor retail spaces shall incorporate exterior signage identifying the retailer. 3. Signs may have backing or may comprise individual letters. 4. At least one (1) neon sign shall be incorporated into the Site. Page | 35 5. Signage may be illuminated. 6. Signage may include electronic message displays. G. Freestanding Sign Provisions. 1. Regardless of the base zone, properties with a minimum of 400 feet of frontage on the following primary corridors are permitted one (1) freestanding sign to ensure visibility from high-speed traffic: a. University b. Mesa Drive c. Hibbert 2. 2nd Street Buffer. No freestanding sign or sign exceeding 15 square feet in area shall be placed within 50 feet of 2nd Street. 3. Properties with less than 400 feet of frontage are permitted to jointly erect one (1) freestanding sign if their total frontage on an approved primary corridor is 400 feet or more. 4. Freestanding signs shall be integrated into the surrounding landscape design. 5. Freestanding signs may be illuminated. Page | 36 Chapter 5 Thoroughfare Standards 5-1: Purpose. The intent of this Section is to provide a catalog of pre-approved thoroughfare assemblies to support a compact, walkable, and connected neighborhood pattern within the project area. A diverse network of thoroughfares, each serving a distinct role, shall organize movement throughout the Site while creating walkable blocks and a coherent neighborhood structure. Connectivity and porosity are fundamental to walkability and shall be achieved through a finer-grained circulation pattern that shortens walking distances, improves access, and supports a pedestrian-oriented environment. The circulation network shall balance the needs of pedestrians, bicyclists, and vehicles, with an emphasis on lower design speeds and a more walkable public realm than is typical in other parts of the City. This is true especially along Hibbert, which will function as a Main Street of the development. Streets, paseos, pathways, and mid-block connections shall work together to provide multiple route options and direct connections between housing, retail, civic spaces, and other key destinations. A. Streets and pedestrian routes should align to create clear and direct connections where feasible. B. Paseos, pathways, and mid-block connections should be used to increase porosity and shorten walking distances. C. The circulation network should provide multiple route options for pedestrians and cyclists. D. Connections should link housing, retail, open spaces, and other key destinations. E. Gated or disconnected circulation patterns shall be avoided. 5-2: Applicability. A. This Chapter establishes the approved thoroughfare assemblies for development within the project area and supplements the City of Mesa Engineering & Design Standards Manual. In the event of a conflict between this Chapter and the City of Mesa Engineering & Design Standards Manual, the standards of this Chapter shall govern. B. These thoroughfare standards shall apply to both the modification of existing thoroughfares and the development of new thoroughfares in the project area. C. The placement and application of thoroughfare assemblies shall be guided by the circulation plan in this IIP. The six (6) thoroughfare types in this Chapter may be used within any Zone of the project area. The final alignment of local streets, shared streets, shared lanes, park pathways, and pathways shall be determined at time of Development Plan Review. Page | 37 Map 5-2.A — Conceptual Circulation Plan Map 5-2.B — Contextual Pedestrian and Bike Circulation Plan Page | 38 5-3: Design Considerations. A. Measurements. 1. All lane dimensions shall be measured to the face of the curb. Where no curb and gutter is provided, the lane dimension shall be to the edge of the pavement. 2. For Shared Lane thoroughfares, shared travel lane dimensions assume two-way traffic and are for a single lane accommodating two-way traffic. B. Pedestrian Movement. 1. Within the project area, pedestrian comfort shall be a primary consideration of the thoroughfare design. Design conflict between vehicular and pedestrian movement generally shall be decided in favor of the pedestrian. 2. The requirements for pedestrian and bicyclist safety, comfort and access shall establish thoroughfare design speed. The design speed shall be the primary consideration used to determine the dimensions of each thoroughfare element, such as vehicular lanes and turning (curb) radii. 3. Enhanced crossing treatments may include raised crossings, decorative or textured paving, contrasting materials, enhanced striping, curb extensions or other design features intended to increase pedestrian visibility and awareness. 4. Intersections and mid-block crossings may be included and shall be designed to calm vehicular traffic, improve pedestrian connectivity, and minimize crossing distances where practicable while allowing for natural direction of pedestrian traffic where possible. C. Bicycle Movement. 1. Shared lanes with sharrow markings on the travel lanes or a bicycle boulevard, a road shared by bicycles and vehicles, are allowed and may be required on streets with a design speed of 25 mph or less. 2. Bike Lanes may also be required to provide continuity between neighborhoods or based on traffic volumes. D. Fire Access. 1. Additional design considerations may be needed to accommodate Fire/Emergency Access, including, but not limited to, the location of rolled curbs and bulb-outs to accommodate fire truck outriggers. 2. The project must adhere to City of Mesa Fire Regulations as interpreted by the Fire Marshall, including apparatus and aerial apparatus requirements. Not every street within the project area will be required to provide apparatus access to meet these requirements. E. Deliveries. Additional design considerations may be needed to accommodate delivery access for large retail or civic uses. Page | 39 F. Landscaping. 1. The spacing of the street trees may be adjusted with the approval of the Planning Director or designee to accommodate specific site conditions. 2. At retail frontages, the spacing of the trees may be irregular, to avoid visually obscuring the shopfronts. 3. Streets with a Right-of-Way width of 40 feet or less shall be exempt from the tree requirement. G. It is expected that large vehicles may encroach on the opposing lane when making turning movements. H. There is no minimum distance between intersections or minimum tangent length past what is practicable on a site plan, because of the low speed of vehicle travel. I. Thoroughfares that will serve as public transit or school bus routes may need additional design considerations, including, but not limited to, the location of bus stops. 5-4: Thoroughfare Types. A. Purpose. 1. Thoroughfare Types organize the Site’s circulation network, block structure, and public realm. 2. Each type serves a distinct role in balancing movement, access, and neighborhood character. 3. Together, the six (6) thoroughfare types create walkable blocks and connected public spaces that support a compact, pedestrian-oriented pattern of development. B. Form-Based Code and Engineering Standards. 1. The FBC thoroughfare assemblies on which these thoroughfare types were based were previously added into the City of Mesa Engineering and Design Standards. 2. As the thoroughfare assemblies in this document are no more constrained than those in the FBC, they are also added into the City of Mesa Engineering and Design Standards. C. Suburban Streets. 1. This IIP regulates improvements on Suburban Streets between back of curb and property line. 2. Compare to Table 11-61-8.A: Thoroughfare Assembly BV-130-84. 3. If required by right-of-way dimensions or existing underground utilities, dimensions and tree requirements may be altered or eliminated by the City Engineer. 4. Yard/stoop may be as narrow as zero (0) feet. 5. Only the frontage of the street (outside of curb) on the project side must conform to this Section. Page | 40 6. Flex space and walkways (with sidewalk easement) can be located outside of the right-of-way on private property. Table 5-4.A — Suburban Streets Standards 1. Suburban Streets Intent and Description Suburban Streets define the edge of the Culdesac neighborhood and accommodate higher traffic volumes and speeds while providing vehicle access to adjacent development. Their character is defined by a conventional arterial condition that prioritizes regional movement over local pedestrian activity. Buildings are generally set back from the roadway to create an appropriate protection between the roadway and the pedestrian environment. 2. Street Classification Ownership Public 3. Frontage Design Standards Flex Space Min. 5' with tree wells, a continuous planter, F + H green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements 1 Walkway Min. 6' sidewalk G Street Trees Trees spaced a max. 30' on center or F and/or H equivalent grouping average with min. 4'x4' area for root growth, comprising dirt, decomposed granite, metal grate, silva cell, mulch, or other similar material conducive to tree root growth Drainage Collection Curb and gutter or inlet Page | 41 Curb Square Pedestrian and Multi-Use Path Surface Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee outside public right-of- way or with any required maintenance agreement 4. Notes: 1. The required Flex Space width may be provided between street and sidewalk (F), between sidewalk and stoop (H), or a combination of the two where their combined width shall meet or exceed the minimum. D. Mixed Use Streets. 1. Compare to Table 11-61-8.H: Thoroughfare Assembly CS-60-32. 2. If required by right-of-way dimensions or existing underground utilities, dimensions and tree requirements may be altered or eliminated by the City Engineer. 3. Each half of a street may have different dimensions and layouts 4. Yard/stoop may be as narrow as zero (0) feet. 5. If only one side of a street is adjacent to the project area, only the half of the street on the project side must conform to this code. 6. Flex space and walkways (with sidewalk easement) can be located outside of the right-of-way on private property. Table 5-4.B — Mixed-Use Streets Standards 1. Mixed-Use Streets Intent and Description Mixed-Use Streets serve as one of the primary neighborhood spines and should support shops, restaurants, services, and everyday public life. Their character is defined by an active, pedestrian-oriented public realm shaped by on-street parking, bike facilities, wide sidewalks, and street trees. Along these streets, buildings front directly onto the sidewalk or with minimal setback. Page | 42 Illustrative: bike lane Illustrative: parallel parking Page | 43 Illustrative: perpendicular parking 2. Street Classification Ownership Public or private Design Speed 25 mph or less 3. Overall Widths Right-of-Way, Tract, or Easement Width Min. 37' K Pavement Width Min. 9' J 4. Cartway Design Standards Vehicle Travel Lanes 0 or 1 lane per direction, each with a min. 9' B width Bicycle Travel Lanes Where provided, bicycle lanes shall have a Buffer: D min. 4' width and an additional min. 1' buffer Lane: E when adjacent to vehicle travel lanes or min. 2' buffer when adjacent to on-street parking 1 Parking Lanes Parallel: 0 to 2 lanes; min. 7' width; marked C Angled/perpendicular: 0 to 2 lanes; min. 16' width for reverse angled or min. 18' for head- in angled or perpendicular parking; marked 2 Medians Where provided, min. 4' width except at A transitions 3 Vehicle Space Surface Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee outside public right-of- Page | 44 way or with any required maintenance agreement 5. Frontage Design Standards Flex Space Min. 8' with tree wells, a continuous planter, F + H green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements 4 Walkway Min. 6' Sidewalk G Street Trees Trees spaced a max. 30' on center or A, C, F, equivalent grouping average with min. 4'x4' and/or H area for root growth, comprising dirt, decomposed granite, metal grate, silva cell, mulch, or other similar material conducive to tree root growth 5 Drainage Collection Curb and gutter or inlet, valley gutter, or sheet flow Curb Square, rolled, ribbon, flush, or none (if non- asphalt pavement) Pedestrian and Bike Space Surface Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee outside public right-of- way or with any required maintenance agreement 6. Notes 1. When pavement edge condition includes a gutter, bicycle travel lanes must be min. 5.5' wide including curb and gutter. Buffer space may be occupied by paint, physical barrier, tree wells, a continuous planter, green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements. 2. Where angled/perpendicular parking is provided the adjacent vehicle travel lane must be a minimum 10' wide. 3. If medians are required for fire access, they may be constructed of any surface approved for fire lanes. 4. The required Flex Space width may be provided between street and sidewalk (F), between sidewalk and stoop (H), or a combination of the two where their combined width shall meet or exceed the minimum. 5. If required for existing underground utilities, trees may be placed between parking spaces (with 80' on center or equivalent grouping average and no allée requirement) or eliminated. E. Local Streets. 1. Compare to Table 11-61-8.H: Thoroughfare Assembly CS-60-32. Page | 45 2. If required by right-of-way dimensions or existing underground utilities, dimensions and tree requirements may be altered or eliminated by the City Engineer. 3. Each half of a street may have different dimensions and layouts. 4. Yard/stoop may be as narrow as zero (0) feet. 5. If only one side of a street is adjacent to the project area, only the half of the street on the project side must conform to this code. 6. Flex space and walkways (with sidewalk easement) can be located outside of the right-of-way on private property. 7. 2nd St. shall have a combination of sidewalk, multi-use path, bike lane, and/or landscaped/flex area which constitute a minimum 12-foot-wide greenway or linear park between the project area and the neighborhood to the south. Table 5-4.C — Local Streets Standards 1. Local Streets Intent and Description Local Streets serve as the edges of the neighborhood. They should provide access while supporting a comfortable and walkable environment. Illustrative: bike lanes Page | 46 Illustrative: parallel parking Illustrative: perpendicular parking 2. Street Classification Ownership Public or private Design Speed 25 mph or less 3. Overall Widths Right-of-Way, Tract, or Easement Width Min. 33' K Pavement Width Min. 9' J 4. Lane Assembly Page | 47 Vehicle Travel Lanes 0 or 1 lane per direction, each with a min. 9' B width Bicycle Travel Lanes Where provided, bicycle lanes shall have a Buffer: D min. 4' width and an additional min. 1' buffer Lane: E when adjacent to vehicle travel lanes or min. 2' buffer when adjacent to on-street parking 1 Parking Lanes Parallel: 0 to 2 lanes; min. 7' width; marked C Angled/perpendicular: 0 to 2 lanes; min. 16' width for reverse angled or min. 18' for head- in angled or perpendicular parking; marked 2 Medians Where provided, min. 4' width except at A transitions 3 Vehicle Space Surface Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee outside public right-of- way or with any required maintenance agreement 5. Frontage Design Standards Flex Space Min 6' with tree wells, a continuous planter, F + H green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements 4 Walkway Min 6' Sidewalk G Street Trees Trees spaced a max. 30' on center or A, C, F, equivalent grouping average with min. 4'x4' and/or H area for root growth, comprising dirt, decomposed granite, metal grate, silva cell, mulch, or other similar material conducive to tree root growth 5 Drainage Collection Curb and Gutter or Inlet, Valley Gutter, or Sheet Flow Curb Square, Rolled, Ribbon, Flush, or none (if non- asphalt pavement) Pedestrian and Bike Space Surface Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee outside public right-of- Page | 48 way or with any required maintenance agreement 6. Notes 1. When pavement edge condition includes a gutter, bicycle travel lanes must be min. 5.5' wide including curb and gutter. Buffer space may be occupied by paint, physical barrier, tree wells, a continuous planter, green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements. 2. Where angled/perpendicular parking is provided the adjacent vehicle travel lane must be a minimum 10' wide. 3. If medians are required for fire access, they may be constructed of any surface approved for fire lanes. 4. The required Flex Space width may be provided between street and sidewalk (F), between sidewalk and stoop (H), or a combination of the two where their combined width shall meet or exceed the minimum. 5. If required for existing underground utilities, trees may be placed between parking spaces (with 80' on center or equivalent grouping average and no allée requirement) or eliminated. F. Shared Streets. 1. Compare to Table 11-61-8.H: Thoroughfare Assembly CS-60-32. 2. If required by right-of-way dimensions or existing underground utilities, dimensions and tree requirements may be altered or eliminated by the City Engineer. 3. Each half of a street may have different dimensions and layouts. 4. Yard/stoop may be as narrow as zero (0) feet. 5. If only one side of a street is adjacent to the project area, only the half of the street on the project side must conform to this code. 6. Flex space and walkways (with sidewalk easement) can be located outside of the right-of-way on private property. Table 5-4.D — Shared Streets Standards 1. Shared Streets Intent and Description Shared Streets should function as both circulation routes and public gathering spaces. Their character is defined by low vehicle speeds, pedestrian priority, and flexible use that can support everyday activity, markets, and special events. Along these streets, buildings and public spaces should be arranged to activate the shared environment and reinforce the street as a social space as well as a movement corridor. Page | 49 Illustrative: parallel parking Page | 50 Illustrative: perpendicular parking 2. Street Classification Ownership Public or private Design Speed 25 mph or less if public; 20 mph or less if private 3. Overall Widths Right-of-Way, Tract, or Easement Width Min. 20' K Pavement Width Min. 9' J 4. Lane Assembly Shared Travel Lanes 0 or 1 lane per direction, each with a min. 9' B width Bicycle Travel Lanes Where provided, bicycle lanes shall have a min. 4' width and an additional min. 1' buffer when adjacent to vehicle travel lanes or min. 2' buffer when adjacent to on-street parking 1 Parking Lanes Parallel: 0 to 2 lanes; min. 7' width; marked C Angled/perpendicular: 0 to 2 lanes; min. 16' Page | 51 width for reverse angled or min. 18' for head- in angled or perpendicular parking; marked 2 Medians Where provided, min. 4' width except at transitions3 Street Surface (Entire Street Section) Asphalt and concrete Decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee 5. Frontage Design Standards Flex Space Where provided, no minimum width. May F + H include tree wells, a continuous planter, green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements 4 Walkway Where provided, min. 3' sidewalk G Street Trees Trees spaced a max. 30' on center or A, C, F, equivalent grouping average with min. 4'x4' and/or H area for root growth, comprising dirt, decomposed granite, metal grate, silva cell, mulch, or other similar material conducive to tree root growth 5 Drainage Collection Curb and Gutter or Inlet, Valley Gutter, or Sheet Flow Curb Square, Rolled, Ribbon, Flush, or none (if non- asphalt pavement) 6. Notes 1. When pavement edge condition includes a gutter, bicycle travel lanes must be min. 5.5' wide including curb and gutter. Buffer space may be occupied by paint, physical barrier, tree wells, a continuous planter, green stormwater infrastructure, street amenities, sidewalk, and/or similar improvements. 2. Where angled/perpendicular parking is provided the adjacent vehicle travel lane must be a minimum 10' wide. 3. If medians are required for fire access, they may use any surface approved for fire lanes. 4. The required Flex Space width may be provided between street and sidewalk (F), between sidewalk and stoop (H), or a combination of the two where their combined width shall meet or exceed the minimum. 5. If required for existing underground utilities, trees may be placed between parking spaces (with 80' on center or equivalent grouping average and no allée requirement) or eliminated. G. Shared Lanes. 1. Compare to Table 11-61-8.L: Thoroughfare Assembly RL-20-12. Page | 52 2. If required by right-of-way dimensions or existing underground utilities, dimensions and tree requirements may be altered or eliminated by the City Engineer. 3. Each half of a street may have different dimensions and layouts. 4. Yard/stoop may be as narrow as zero (0) feet. 5. Any part of the thoroughfare section except vehicle lanes and bike lanes can be located outside of the tract on a private lot. The area outside the area on a private lot shall be located within a tract or easement owned or managed by the HOA or similar entity. Table 5-4.E — Shared Lanes Standards 1. Shared Lanes Intent and Description Shared Lanes should provide narrow vehicular access to smaller blocks and building frontages while maintaining a human-scaled environment. Their character is defined by slow speeds, constrained dimensions, and a more intimate relationship between buildings and the public realm. Along these lanes, buildings may front closely to the access way or provide secondary frontage conditions that support a compact development pattern. Page | 53 Illustrative: parking on both sides Page | 54 Illustrative: flex space on one side 2. Street Classification Ownership Private Design Speed <20 mph 3. Overall Widths Tract or Easement Width Min. 9' K Pavement Width Min. 9' J 4. Lane Assembly Shared Travel Lanes 1 or 2@ min. 9' (each lane single direction) or B 1 @ min. 12' (bi-directional lane) Bicycle Travel Lanes In shared lane B Parking Lanes Parallel: 0 to 2 lanes; min. 7' width; marked C Angled/perpendicular: 0 to 2 lanes; min. 16' Page | 55 width for reverse angled or min. 18' for head- in angled or perpendicular parking; marked 1 Medians None Street Surface (Entire Street Section) Asphalt, concrete, decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee 5. Frontage Design Standards Flex Space None or in line with parking C Walkway In shared lane B Street Trees None or in line with parking C Drainage Collection Curb and Gutter or Inlet, Valley Gutter, or Sheet Flow Curb Square, Rolled, Ribbon, Flush, or none (if non-asphalt pavement) 6. Notes 1. Where angled/perpendicular parking is provided the adjacent vehicle travel lane must be a minimum 10' wide. H. Pathways. 1. Each half of a street may have different dimensions and layouts. 2. Yard/stoop may be as narrow as zero (0) feet. 3. Any part of the thoroughfare section can be located outside of the tract on a private lot. The area outside the area on a private lot shall be located within a tract or easement owned or managed by the HOA or similar entity. Table 5-4.F — Pathway Standards 1. Pathway Intent and Description Pathways are pedestrian and bicycle-only corridors that connect open spaces, play areas, and neighborhood destinations through a landscaped circulation route. Their character is defined by planting, shade, and amenities that encourage walking, biking, gathering, and informal recreation. Some are especially narrow pedestrian connections that increase access and shorten walking distances throughout the Site. Buildings, storefronts, and open spaces should orient to the route where feasible to reinforce safety, activity, and visual interest. Page | 56 2. Classification Ownership Private Movement Type Pedestrians and bikes 3. Overall Widths Tract or Easement Width 3' min. K 4. Design Standards Walkway Min. 3' sidewalk G Flex Space No minimum. May include tree wells, a continuous planter, H green stormwater infrastructure, street amenities, sidewalk, and/or similar infrastructure Pavement Surface Asphalt, concrete, decomposed granite, stabilized aggregate, pavers, permeable surfaces like grass pavers, or other materials as allowed by Planning Director or designee Page | 57 I. Curb Radii. Curb radii are determined by the lower of the design speeds of thoroughfare types at an intersection, based on Table 5-4.G — Curb Radii. Table 5-4.G — Curb Radii Speed Curb Radius 1 <20 mph 5'—10' 20—25 mph 10'—15' 30—35 mph 15'—20' Notes 1. The dimensions above require the provision of an effective curb radius and/or mountable curbs that meet the needs of fire and emergency access, if applicable. J. Additional Form-Based Code Thoroughfare Standards. Thoroughfares established in the City of Mesa’s Form- Based Code that are not identified as pre-approved in this IIP may also be approved, subject to the following additional standards: 1. Dimensions are understood as minimums unless noted. 2. The project area can use thoroughfares from any zone identified in the City of Mesa’s Form-Based Code. 3. If only one side of a street is adjacent to the project area, only the half of the street on the project side must conform to this Section. Page | 58 4. If required for existing underground utilities, all dimensions may be altered by the City Engineer. 5. If medians are required for fire access, they may be constructed of any surface approved for fire lanes. 6. Planter and walkway zone placement may be swapped. 7. If required for existing underground utilities, trees may be placed between parking spaces (with 80' on center or equivalent grouping average and no allée requirement) or eliminated. 8. Curbs may be square, rolled, ribbon, flush, or none (if non-asphalt pavement). 9. Wherever angled parking is allowed, 18-foot minimum perpendicular parking (with adjacent 10-foot vehicle lane) is also permitted. 10. For private streets, any part of the thoroughfare section except vehicle lanes and bike lanes can be located outside of the tract on a private lot. The area outside the area on a private lot would be located within a tract or easement owned or managed by the HOA or similar entity. 11. For private streets that are yield or slow movement types, sidewalks and planters are not required if the street is treated as shared space. 12. The right-of-way width in Table 11-61-8.L: Thoroughfare Assembly RL-20-12 should be 20 feet. Chart 5-4.A — Allowed Thoroughfare Process K. Maintenance Obligations. Page | 59 1. Public streets, sidewalks, and landscaping are to be maintained by the City of Mesa, except where materials used do not follow Mesa standards. Those materials would be maintained as determined by maintenance agreement. 2. Private streets are to be maintained by the owner of the tract or lot they occupy. Page | 60 Chapter 6 Open Space Standards 6-1: Purpose. The standards established in this Section provide a diverse network of publicly accessible civic spaces and private open spaces that complement one another and integrate with nearby parks and open spaces, including Pioneer Park, to provide opportunities for recreation, gathering, and relaxation. 6-2: Minimum Open Space Requirements. A. Ten percent (10%) of net acreage of the project area, as defined by current property boundaries, shall be provided as open space. B. Any individual phase is required to meet a seven percent (7%) minimum open space requirement. C. Required open space includes private open space such as yards, balconies, patios, and roof decks accessible to individual residential units; semi-private open space accessible to residents of multiple units; and public open space such as plazas, parks, greens, paseos, and hardscaped community gathering areas. D. Open space may be landscaped or hardscaped. Landscaped open space shall not have a slope greater than 3:1 without Planning Director or designee approval, exclusive of areas used for stormwater retention and berming. E. Qualifying open spaces shall have a minimum horizontal dimension of three (3) feet. F. Trees shall be planted throughout open spaces, except where infeasible due to utilities, stormwater management facilities, building footprints, amenity spaces, or emergency and solid waste access routes. 6-3: Private Open Space. A. Private Open Space Requirements. 1. A minimum of 50% of the for-sale and for-rent units (student housing excluded) shall include at least one (1) of the following: private deck, private balcony, private patio, or private yard. Each unit’s open space must be min. 15 square feet. Multiple private open spaces may be combined into a private open space shared by multiple units. 2. Private open spaces, where provided, shall be directly accessible to the dwelling unit it serves. B. Civic Space Requirements. 1. Civic Space. There are six (6) different civic space types established in Table 6-3.A — Civic Space Type Standards. Playgrounds and Community Gardens may be incorporated into any of the other four (4) civic space types or may stand alone. Civic space types not specifically identified in Table 6-3.A may be approved by the Planning Director or designee upon determining they provide comparable recreational, gathering, or public amenity value and are consistent with the intent of this Chapter. Page | 61 2. Civic Space Type Standards. Table 6-3.A — Civic Space Type Standards provides the standards for civic space types allowed by right. Illustrations and descriptions are illustrative in nature and not regulatory. Table 6-3.A — Civic Space Type Standards 1. Civic Space Greenway Neighborhood Green or Plaza or Pocket Park Type Square Illustration Description A civic space consisting of A civic space designed for A small civic space designed a linear open space that community gathering, social for informal gathering, social may follow natural or activity, and civic use, or for interaction, passive recreation designed corridors and informal, passive recreation and neighborhood use, provides opportunities for which may include seating typically characterized by pedestrian and areas, hardscape, landscaping, landscaping, shade, and micromobility movement, and spaces for neighborhood informal seating or play areas, recreation, and landscape programming or play. and typically serves nearby connectivity. residents, workers, or visitors. 2. Location and Size Minimum Size 2,500 sf (10' wide by 250' 2,500 sf No minimum long) Maximum Size No maximum No maximum 2½ acres 3. Typical Facilities Passive and Active Passive and Active Passive Recreation, Accessory Recreation, Accessory (unstructured or structured) Structure,1 Drinking Fountains, Structure,1 Drinking Recreation, Accessory Paths and Trails Fountains, Community Structure,1 Drinking Facility <5,000 gsf, Paths Fountains, Community Facility and Trails <5,000 gsf, Paths and Trails 1. Civic Space Courtyard Playground Community Garden Type Illustration Page | 62 Description An open space available A civic space designed to A civic space designed for the for semi-private activities support children’s play and cultivation of plants by in close proximity to recreation, which may include residents or users of the neighborhood residences. play structures, natural development for small-scale features, open areas, and cultivation. Community seating, and may be Gardens may be included incorporated within other within other civic spaces. civic spaces. 2. Location and Size Minimum Size No minimum No minimum No minimum Maximum Size 1 acre No maximum No maximum 3. Typical Facilities Passive Recreation, Accessory Structure,1 Drinking Accessory Structure,1 Drinking Accessory Structure,1 Fountains, Paths and Trails Fountains, Paths and Trails Drinking Fountains, Paths and Trails 4. Notes 1. Accessory structures including, but not limited to, restrooms, open-air pavilions, gazebos, picnic shelters, food and beverage stands, and outdoor theaters, shall not be subject to the physical requirements of Chapter 2: Zone Standards and Chapter 4: Development Standards. They should be designed and furnished to be consistent with the character of the Zone in which they are located. Page | 63 Chapter 7 Review and Development Procedures 7-1: Purpose. The IIP provides extensive Development Standards and Design Guidelines that will ensure high-quality, mixed- use development. The purpose of establishing the Infill Plan is to create certainty while providing flexibility needed in developing a site of this scale. This Infill Plan proposes to modify the framework of the City of Mesa Zoning Ordinance. This IIP proposes to supersede the City of Mesa Zoning Ordinance to create a set of development standards and design guidelines that are tailored to the Site and that implement Mesa's Site 17 guiding principles for development. All proposed developments shall follow the process set forth in the following Sections. This Section focuses solely on confirming compliance with the Culdesac Mesa IIP vision and need to be a flexible/dynamic document to accelerate the approval process and support the incremental development of the Site. 7-2: Applicability of Culdesac Mesa IIP. A. Applicability. 1. The Building Form Standards, Thoroughfare Standards, and Civic Space Standards shall apply to all development occurring after the effective date of the Culdesac Mesa IIP. 2. The Culdesac Mesa IIP establishes the Zones, Land Use regulations, and procedures governing the development of the Site. B. Relationship to the Mesa Zoning Ordinance. Except as otherwise provided herein, all development within the Site shall comply with the Culdesac Mesa IIP. 1. Where a conflict exists between the provisions of the IIP and the Mesa Zoning Ordinance, the provisions of the Culdesac Mesa IIP shall control. 2. Where the Culdesac Mesa IIP does not establish a development standard, regulation, procedure, or other requirement, the applicable provisions of the Mesa Zoning Ordinance shall apply. C. Relationship to the Development Agreement. Where a conflict exists between the provisions of the IIP and the Development Agreement, as Amended, and adopted by City Council, the Development Agreement shall apply. 7-3: Development Plan Review and Permitting Process. A. Zone Selection. At the time of Development Plan Review submittal, an applicant may elect to develop a parcel in accordance with either the assigned Zone or a less intense Zone. A parcel may also be subdivided into multiple Zones, provided that no portion of the development is assigned or developed at a greater intensity than the Zone designated on Map 2-1.A — Culdesac Mesa Regulating Map. Page | 64 B. Development Plan Review Required. All development within the Site boundaries shall require an approved Development Plan prior to the issuance of any building permit. C. Pre-Submittal Conference. A Pre-Submittal Conference is required prior to submittal of a Development Plan or Development Plan Modification. The Pre-Submittal Conference shall be conducted in accordance with the Customized Review Schedule set forth in Table 7-3.A — Pre-Submittal Conference Schedule, with the key milestone days as shown below. Table 7-3.A — Pre-Submittal Conference Schedule Task Date (Calendar Days) May be submitted on any Monday by noon Pre-Submittal Conference Request Submitted Day 1 Pre-Submittal Report Provided by Staff Day 11 Pre-Submittal Conference Day 16 A. Application Requirements. All applications for Development Plan Review shall include: 1. Phase Compliance Tracking Table. Identification of the applicable Zone and Phase Compliance Tracking Table consistent with the applicable Development Agreement, as Amended, and adopted by City Council. a. Phase Compliance Tracking Table. The applicant shall submit a completed Phase Compliance Tracking Table demonstrating the following for the applicable phase and cumulatively for the Site: i. Residential Units. The total number of dwelling units proposed with the application, the cumulative number of dwelling units approved or constructed across all prior phases, and cumulative percentage of the minimum residential unit requirement (1,000 units minimum) established by the Culdesac Mesa IIP and Development Agreement. ii. Commercial Floor Area. The commercial square footage proposed with the application, the cumulative commercial square footage approved or constructed within prior phases, and the cumulative percentage of the minimum floor area (25,000 square feet) required by the Culdesac Mesa IIP and Development Agreement. iii. Open Space. The total private, semi-private, and publicly accessible civic space; the combined open space provided; and the percentage of open space relative to the minimum 10% of the net Site required by the Culdesac Mesa IIP and Development Agreement. iv. Development Plan Modifications. For applications proposing modifications to a previously approved Development Plan, the net changes in total open space and total building footprint, expressed in both square feet and percentage, demonstrating compliance with the minimum open space and building footprint requirements of the IIP. v. Additional Materials. Additional materials and plans may be requested by the Planning Director to determine full compliance with the Culdesac Mesa IIP. Page | 65 Table 7-3.B — Example Phase Compliance Tracking Table Phase [X] DPR Case No.: [X] Phase Gross Site Area: [X] sf ([X] ac) Submission: ☐ Initial DPR ☐ Modification This Prior Cumulative Requirement Metric / Component Submission Cumulative Result Status Total (c) / Standard (a) (b) A. Residential & Commercial Residential units [X] [X] [X] [X] [X]% On track Commercial (gross sf) [X] [X] [X] [X] [X]% On track B. Open Space Private open space (yards, balconies, [X] — — — — — patios, roof decks) Semi-private open space (shared among [X] — — — — — multiple units) Publicly accessible civic space (plazas, [X] — — — — — parks, greens, paseos, hardscape) Combined total open [X] — — [X] [X] Compliant space C. Modification Tracking: complete only if this submission modifies a previously approved DPR For rows in this section: (a) = Proposed (Modified) (b) = Previously Approved (c) = Net Change [X] [X] [X] Total open space [X]% — Compliant [X]% [X]% [X]pp Total building [X] [X] [X] — — Tracked footprint [X]pp 2. Property Owner Authorization letter and/or form. 3. Project Narrative describing the proposed project, design intent, and compliance with the vision, goals and design guidelines of the Culdesac Mesa IIP. 4. ALTA/NSPS Land Title Survey showing the location of existing utilities including water mains, sanitary sewer mains, storm sewer, cable, electric, gas, and telephone; location of all existing structures on the subject lot; and any recorded easements or deed restrictions. 5. Site Plan that is fully dimensioned showing the location and area of site development features including but not limited to, buildings, structures, drive aisles, parking spaces, sidewalks, etc. Page | 66 6. Landscape Plan showing the location, type, and size of all proposed trees; and understory plantings shown as a general hatch with comprehensive plant palette. Provide a tree list, which includes the quantities of all proposed trees, common botanical names, and their square foot equivalencies. 7. Building Elevations that are fully dimensioned, colored elevations/black and white showing sufficient detail to convey the architectural content for all proposed building and structures including building height, pitch of roof, building materials and colors, architectural elements, etc. 8. Photometric Plan including cut sheet details. 9. Grading, Drainage, and Utilities Plan showing preliminary dimensions and locations of all easements, physical lines, and other equipment and apparatus for providing water, sanitary sewer, fire protection, electricity, natural gas and other utility services. Show grades and cross-sections of all streets/sidewalks and alleys. 10. Colors/Materials Board (digital copy). 11. Traffic, Parking, and Utilities Capacity Confirmation Statements. City of Mesa staff may require additional enhanced studies or documents for their review(s). 12. Mobility Plan that shows location of parking, bike parking, ride share drops and pick up points, public transportation, as well as other modes of transportation available to residents and visitors. D. Public Notice. 1. Notice Required. Prior to administrative approval of a Development Plan Review, public notice shall be provided in accordance with this Section. 2. Notice Area. The City of Mesa shall provide a noticing list consisting of addresses for: a. Property owners within 300-feet; b. HOAs within ½ mile; and c. Registered neighborhoods within one (1) mile of the boundaries of the Site. 3. Notice Content. The public notice letter should contain the following information: a. A general description of the proposed project, noting a “pending administrative approval.” b. The location of the project Site. c. The names of the applicant and/or the owner of the property. d. A copy of the site plan and elevations. e. Instructions for submitting written comments, including the contact information for the Applicant and City of Mesa Case Planner. Page | 67 f. A statement that written comments must be received by the City of Mesa Case Planner within 10 days from the postmarked date of the notice letter. 4. Mailing. The Applicant shall mail the public notice letter no later than 21 days prior to the anticipated Administrative Approval date. 5. Affidavit of Notification. A signed and notarized Affidavit of Notification, and copy of the notification letter, must be submitted to the City of Mesa Case Planner no later than five (5) days after mailing the letter. E. Review Timeline. All Development Plan Review and Modifications shall be reviewed and approved by the Planning Director or designee through the administrative process. All “days” noted shall be considered City of Mesa business days. 1. Following receipt of a complete application, the City shall provide first review comments within 15 days. 2. Resubmissions by the applicant to address staff review comments which shall be reviewed by the City within 15 days from each resubmission. 3. Total active City review time shall not exceed 45 days, exclusive of any period during which the application is with the applicant for resubmission. F. Administrative Decisions. Following the 10-day public comment period the Planning Director or designee may approve, approve with conditions, or deny a Development Plan Review application. The Planning Director or designee shall not condition or deny an application otherwise confirming to this IIP on the basis of public comment. 7-4: Development Plan Modifications. Development Plan modifications shall be reviewed administratively by the Planning Director or designee. Development Plan Modification may include, but are not limited to, the following: A. Change to open space, provided combined private and publicly accessible open space is not reduced below seven percent (7%) of the phase’s gross Site area. B. Adjustments to residential unit counts or commercial floor area, provided the development continues to provide at least 90% of the minimum residential units and commercial square footage required by the Development Agreement, as amended. C. Parking adjustments in accordance with Development Agreement, as Amended, and adopted by City Council. D. Modifications to the street network, shared lanes, circulation system, or parking layout, provided the overall circulation system is maintained. E. Any adjustments to any of the following elements, consistent with the Development Agreement, as Amended, and adopted by City Council; as follows: Page | 68 1. Relocation or reconfiguration of plazas, greens, hardscaped open spaces, and community amenities, provided the minimum open space requirements continue to be satisfied. 2. Modifications to mobility hubs, streetscape improvements, landscaping, lighting, furnishings, public art, or similar site improvements. 3. Streetscape modifications within the public right-of-way approved by the City of Mesa. 7-5: Development Plan Expiration and Extensions. A. Expiration. An approved development plan or Development Plan Modification shall expire five (5) years following the date of the original approval, unless a building permit application has been submitted to the City and remains under active review. B. Extensions. The Planning Director or designee may grant one (1) extension of up to two (2) years. An application for a time extension shall be made in writing no more than 90 days after the approval expires. 7-6: Neighborhood Programming Process. A. Purpose. The Neighborhood Programming Process establishes an administrative framework for the review and approval of recurring Neighborhood Programming as an authorized component of the development. Approved Neighborhood Programming shall utilize infrastructure and physical improvements approved through an Interim Use Plan, where applicable, and may occur without obtaining individual Special Event Licenses, Temporary Use Permits (TUP), or Special Use Permits (SUP), except as otherwise provided in this Section. The Neighborhood Programming Process is intended to: 1. Enable frequent, recurring, and diverse programming throughout the year. 2. Support local economic development and small business incubation. 3. Foster social connection, cultural expression, and neighborhood identity. 4. Ensure coordination with applicable health, safety, and operational requirements. 5. Eliminate the need for individual Special Event Licenses, Special Use Permits (SUP), or Temporary Use Permits (TUP). B. Applicability. The provisions of this Section apply to all Neighborhood Programming conducted within designated Civic Spaces, streets, paseos, and other areas identified for programming within the approved Development Plan Review. C. Neighborhood Programming Plan. Prior to initiating Neighborhood Programming, the Applicant shall submit a Neighborhood Programming Plan for administrative review and approval by the Planning Director or designee. 1. Plan Requirements. The Neighborhood Programming Plan shall demonstrate consistency with the vision and goals of the Culdesac Mesa IIP and provide sufficient information to describe: Page | 69 a. The anticipated types of programming, including frequency, duration, hours of operation, and estimated attendance. b. Operational characteristics, including vendors, activities, temporary improvements, and general event setup. c. Programming locations, pedestrian circulation, emergency access, and supporting infrastructure, including utilities, lighting, and restrooms. d. Operational management, including coordination with City departments and communication with surrounding property owners, when applicable. 2. Additional Review Required. Activities authorized under an approved Neighborhood Programming Plan may require additional City review when they include one (1) or more of the following: a. Public street or right-of-way closures. b. Alcohol service or temporary extension of licensed premises. c. Tents and membrane structures larger than 400 square feet and tents without walls (canopies) larger than 1200 square feet. d. Pyrotechnics. e. Drone show(s). f. Amplified sound above 75db that exceeds the operational characteristics approved in the Neighborhood Programming Plan or is reasonably expected to create unusual off-site impacts. g. Hours of operation that extend past 10:00pm. h. Anticipated attendance exceeding the approved attendance ranges established in the Neighborhood Programming Plan. Such activities shall be reviewed by the City of Mesa; however, review shall be limited to the specific regulated component and shall not require full reapplication of the Neighborhood Programming Plan. 3. Approval. The Planning Director or designee may approve, approve with conditions, or deny a Neighborhood Programming Plan. Approval shall be based on the following findings: a. The proposed programming is consistent with the Vision and Goals within this document (i.e., Culdesac Mesa IIP). b. The programming contributes to a vibrant, active, and publicly accessible environment. c. The programming is compatible with surrounding development and supports Culdesac Mesa as a good neighbor. Page | 70 d. The programming can be conducted in a manner that protects public health, safety, and welfare. e. The programming supports a diverse mix of uses and economic participation, including opportunities for local businesses and community members. 4. Effect of Approval. Activities conducted in substantial conformance with the approved Neighborhood Programming Plan shall be considered allowed use(s) or activity(ies) and not subject to the requirements of Mesa City Code governing Special Events, Temporary Use Permits, or Special Use Permits. 5. Approved Duration. The Neighborhood Programming Plan shall establish a programmatic framework for a period of up to 12 months and may be updated periodically within that timeframe or extended. 6. Ongoing Administration. The approved Neighborhood Programming Plan shall serve as the basis for ongoing administrative coordination. The Applicant shall maintain ongoing coordination with the City's Special Events Office and other applicable departments as necessary to facilitate implementation of the approved Neighborhood Programming Plan. The Applicant shall: a. Maintain records of participating vendors. b. Inform vendors of their responsibility to comply with applicable federal, state, and local licensing, permitting, and tax requirements. c. Provide documentation upon request by the City. 7. Modifications and Renewals. a. Minor Modifications. Minor changes to programming types, frequency, or layout may be approved administratively by the Planning Director or designee within seven (7) days of submittal (i.e., calendar days). b. Major Modifications. Substantial changes to programming intensity or operational characteristics may require submission of an updated Neighborhood Programming Plan. c. Renewal. A Neighborhood Programming Plan may be renewed administratively by the Planning Director or designee within seven (7) days of submittal (i.e., calendar days), when the programming remains substantially consistent. 7-7: Interim Uses. A. Purpose. Interim Uses are temporary uses, structures, infrastructure, and site improvements intended to activate the Site, during and between phases of development. Interim Uses are not permanent in nature and are intended to support placemaking, recreation, economic activity, community gathering, and other neighborhood-serving functions. The provisions of this Section apply to Interim Uses occurring prior to development, during phased development on undeveloped or inactive portions of the Site, and after development within designated Civic Spaces or other areas approved through an Interim Use Plan (IUP). Interim Uses may be relocated or Page | 71 reconfigured within the Site over time, provided they remain consistent with an approved Interim Use Plan. The Interim Use process is intended to: 1. Activate the Site prior to and during phased development. 2. Encourage flexible, low-cost, and adaptable improvements. 3. Support placemaking, recreation, neighborhood gathering, and local economic activity. B. Permitted Interim Uses. Interim Uses may include, but are not limited to: 1. Temporary site improvements, including shade structures, seating, lighting, parklets, public art, landscaping, and similar activities. 2. Outdoor dining areas, food truck courts, beer gardens, and similar food and beverage areas. 3. Urban agriculture, community gardens, and outdoor plant nurseries. 4. Recreational, cultural, educational, or artistic installations. 5. Temporary recreational facilities, including skate parks, bike pump tracks, bicycle parking, fitness areas, and similar amenities. 6. Temporary streetscape improvements and traffic calming features, including pavement striping, paint, delineators, and similar improvements that do not conflict with approved permanent infrastructure. C. Interim Use Plan. Prior to establishing an interim use, the Applicant shall obtain approval of an Interim Use Plan (IUP). The IUP may authorize multiple interim uses, installations, structures, and activities within a defined area for a specified period of time. Interim Uses may be temporary, seasonal, recurring, or multi-year in duration. The Interim Use Plan (IUP) shall include sufficient information to describe the proposed interim uses, their physical characteristics, operational framework, and supporting infrastructure. The level of detail provided shall be commensurate with the scale and complexity of the proposed uses. At a minimum, the IUP shall include: 1. Project Narrative. A description of the proposed interim uses, including: a. Consistency with Vision and Goals of the Culdesac Mesa IIP. b. Relationship to development phases. c. Compatibility with surrounding development. d. Anticipated duration, scale, and operational characteristics. The anticipated duration establishes the length of time for which the IUP is active before requiring renewal. 2. Site Plan. A plan identifying areas intended for Interim Uses, including: Page | 72 a. Physical layout. b. Pedestrian circulation and accessibility. c. Emergency and fire access. d. Temporary parking, loading, staging, and operational areas. 3. Infrastructure Plan. A description of the temporary or permanent infrastructure supporting interim uses, including: a. Restrooms and handwashing stations. b. Power generation and distribution (including generators and temporary electrical systems). c. Water supply, wastewater, and irrigation systems (including temporary connections or storage). d. Lighting, shade structures, seating, fencing, and other improvements. 4. Operational Plan. A description of how interim uses will be installed, operated, and maintained, including: a. Installation and removal procedures. b. Dust control measures, if applicable. c. Stabilized pedestrian pathways. d. Waste management and sanitation. e. Maintenance procedures. f. Safety protocols. 5. Coordination and Management Plan. A description of the approach to ongoing coordination and operations, including: a. Coordination with applicable City departments and external agencies, including but not limited to Fire, Building Safety, and Maricopa County Environmental Services (MCESD), as needed. b. Ongoing site management approach. c. A good neighbor policy describing communication, approach, and contact information with nearby residents and businesses, as applicable. D. Temporary Modular Structures. Temporary modular structures, including shipping containers and similar prefabricated units, may be permitted as part of an approved Interim Use Plan (IUP), provided they: 1. Are not permanently affixed to the ground. Page | 73 2. Utilize temporary or mobile utility connections (for example: generators, water tanks, temporary hookups), unless otherwise approved. 3. Are not intended for permanent occupancy as enclosed buildings. 4. Maintain required fire access, emergency egress, and public safety. Comply with the Fire Code Temporary Special Event requirements. 5. Remain only for the duration of the approved Interim Use Plan (IUP). E. Administrative Review and Approval. The Planning Director or designee may approve, approve with conditions, or deny an Interim Use Plan. Approval shall be based on the following findings: 1. The proposed interim uses are consistent with the Vision and Goals of the Culdesac Mesa IIP. 2. The proposed interim uses provide a safe, functional, and well-maintained environment. 3. The plan provides adequate circulation, emergency access, infrastructure, and operational management. 4. The interim uses are compatible with existing or planned development phases and surrounding uses. F. Effect of Approval. 1. Interim uses conducted in substantial conformance with the approved IUP shall be permitted administratively. 2. Except as otherwise provided in this Section, interim uses shall not require additional discretionary approvals. 3. Food and beverage service shall comply with all applicable State, County, and City licensing and permitting requirements. G. Additional Review. Activities authorized under an approved Interim Use Plan may require additional review only when they involve: 1. Work within the public right-of-way. 2. Permanent utility connections requiring separate permits. 3. Structures requiring building permits or intended for permanent occupancy. 4. Alcohol service or temporary extension of licensed premises. Review shall be limited to the regulated activity and shall not require the resubmittal of the entire Interim Use Plan. H. Administration. Page | 74 1. The approved Interim Use Plan shall serve as the basis for administrative coordination and approval of Interim Uses. 2. The Applicant shall maintain ongoing coordination through periodic coordination meetings with applicable City departments to verify continued compliance with approved plans; address operational issues; and coordinate installation, modification, or removal of interim improvements. I. Modifications and Renewal. 1. Minor Modifications. Minor changes to layout, infrastructure, or operational characteristics may be approved administratively by the Planning Director or designee within seven (7) days of submittal (i.e., calendar days). 2. Major Modifications. Substantial changes to the scale, duration, or infrastructure of interim uses may require submission of an updated Interim Use Plan (IUP). 3. Renewal. An Interim Use Plan (IUP) may be renewed administratively by the Planning Director or designee within seven (7) days of submittal (i.e., calendar days), when uses and installations remain substantially consistent. 7-8: IIP Amendments. A. Applicability. 1. An IIP Modification may be requested for any Zone Standard, Land Use Regulation, Development Standard, Open Space Standard, Review and Development Procedure, or Definition unless otherwise prohibited by this Chapter. 2. An IIP Modification(s) may be requested for a single building, development phase, or defined area of the Site. B. Application. Requests for an IIP Modification(s) shall be submitted concurrently with the relevant Development Plan Review, Interim Use Plan, or Neighborhood Programming Plan application. The application shall include a narrative describing: 1. The specific standard proposed to be modified. 2. The requested modification. 3. The reason the modification is necessary. 4. How the request satisfies the approval criteria of this Section. C. Minor IIP Amendment. 1. Minor Amendment Criteria. A modification to the IIP shall be considered minor if it involves a change that does not exceed the following: Page | 75 a. The modification does not increase the maximum height permitted within a Zone. b. The requested modification does not exceed 30% of the applicable development standard. 2. Administrative Review. A Minor IIP Amendment shall be processed and reviewed by the Planning Director or designee who may approve, approve with conditions, or deny an administrative modification. The approval shall be based on the following findings: a. The modification is consistent with the City's General Plan. b. The modification is consistent with the vision, goals, and intent of the Culdesac Mesa IIP. c. The modification is necessary to address site constraints, improve safety, enhance the pedestrian environment, or achieve a superior site or building design. D. Major IIP Amendments. 1. Major Amendment Criteria. An amendment shall be deemed major if it involves a change to any of the following: a. A modification to a development standard that exceeds 30% of the applicable standard. b. The modification increases the maximum height permitted within a Zone. c. The addition or removal of land from the boundaries of the approved Culdesac Mesa IIP. 2. Review Authority. A Major IIP Amendment to the Culdesac Mesa IIP shall be processed and reviewed by the Planning and Zoning Board which shall be the final decision maker. E. Appeals. 1. Right to Appeal. The Applicant may appeal the Planning Director’s decision to the City of Mesa Planning and Zoning Board by filing a written appeal within 15 calendar days of the decision. 2. Hearing. The appealed shall be scheduled for consideration by the Planning and Zoning Board within 30 calendar days from the City of Mesa receiving a complete appeal, unless otherwise agreed to by the Applicant. 3. Decision. The Planning and Zoning Board may uphold the decision by the Planning Director or designee, overturn the decision, or approve with conditions to further implement the Culdesac Mesa IIP, protect adjacent properties, preserve neighborhood character, mitigate adverse environmental impacts or other public health and safety reasons. 4. Final Decision. The Planning and Zoning Board shall be the final decision maker. 5. Notice of Decision. Following the final action, the Planning Director or designee shall issue a written decision and provide the Applicant with a copy of the final stamped approved plans, if applicable, for inclusion within the official case file. Page | 76 Chapter 8 Definitions 8-1: Purpose and Applicability. A. Purpose. This Chapter provides the definitions of Land Uses and Specialized Terms and Phrases used in the IIP. B. Applicability. 1. The definitions in this Chapter shall apply to all proposed development within the IIP. 2. This Section replaces all definitions listed within the City of Mesa Zoning Ordinance. 8-2: Land Use Definitions. A. Recreation and Civic Uses: 1. Community Services. A use providing counseling, education, cultural, health, social, or support services to individuals or groups. Medication shall not be provided or dispensed at a community service. Community Services shall not include homeless shelters, charity dining facilities, rescue missions, day labor hiring centers, substance abuse and detoxification center, and similar facilities. 2. Hospital. An institution providing medical and surgical care to the sick or injured, including operating facilities and beds for patients to stay overnight. Hospitals may include accessory uses customarily associated with hospital operations including nursing or extended care facilities, physical therapy and rehabilitation services, gift shops, retail pharmacies, cafeterias or restaurants, employee housing, temporary housing for patient families, and other similar uses primarily serving patients, staff, and visitors. 3. Medical/Dental Clinic. Facilities with five or more licensed practitioners and/or medical specialist, other than hospitals, where patients are admitted for examinations and treatment on either a "walk-in" or "appointment" basis. Patients are treated on an outpatient basis and are not admitted for overnight treatment or observation. This classification includes emergency medical services offered exclusively on an out-patient basis, such as urgent care centers. 4. Medical/Dental Office. Offices where medical and dental services are provided by no more than four licensed primary practitioners (for example: physicians, dentists, chiropractors, optometrists, and similar medical professionals). This classification also includes physical therapy, massage therapy, and counseling services related to medical conditions. 5. Meeting Facility, Public or Private. A facility designed to accommodate public or private gatherings, events, or meetings, including community centers, event spaces, and similar uses, and may include accessory kitchen, dining, or support spaces. 6. Place of Worship. A facility used for religious worship or related activities, which may include accessory educational, administrative, or community uses. Page | 77 7. Public Safety Facility. Facilities providing public safety and emergency services, including police and fire protection and emergency medical services. 8. Recreation Facility, Public or Private. A public or private use designed to provide opportunity for active recreation, passive recreation, sports, fitness, play, or community gathering. Recreation Facilities may consist of indoor or outdoor recreational amenities, open space, landscaped areas, support structures, and accessory uses customarily associated with recreational activities. Accessory uses may include field houses, clubhouses, restrooms, concessions, equipment storage, shade structures, retail sales, food and beverage service, instructional facilities, and event or programming space that primarily supports the recreational use. Recreation Facilities include, but are not limited to, playgrounds, sports fields and courts, gyms, fitness studios, skate parks, bike pump parks, mini golf, trails and paths, splash pads, outdoor amphitheaters, community gardens, open lawns, parklets, game areas, and similar recreational or gathering facilities. Recreation Facilities may be publicly or privately owned and operated on a for-profit or nonprofit basis. B. School and Cultural Institution Uses: 1. School. A facility for education or instruction, including primary, secondary, and post-secondary institutions, and may include associated facilities such as classrooms, offices, cafeterias, dorms, and recreational areas. Schools include, without limitation, the following types: 2. K-12 School, Public or Private. A public or private institution providing primary or secondary education, including kindergarten, elementary, middle, and high schools. 3. Library; Museum. A civic use consisting of facilities for the display, preservation, or lending of books, art, or other cultural or educational materials, which may include accessory retail or food and beverage services. 4. Post-Secondary Institution, Public or Private. A public or private institution providing education beyond the secondary level, including colleges, universities, and commercial, vocational, or industrial trade schools. 5. Studio. A small-scale space used for instruction, rehearsal, production in the arts or other small-scale creative activities, including, without limitation, art, dance, music, or martial arts. 6. Theater / Cinema / Performing Arts Facility. A facility or space used for entertainment or cultural performances, including live theater, concerts, film screenings, and similar activities, which may occur within indoor or outdoor settings. C. Residential Uses: 1. Accessory Dwelling Unit (ADU). An attached or detached subordinate living or commercial space located on the same lot as a primary dwelling unit, designed for independent or semi-independent occupancy. An ADU includes sleeping and sanitation facilities and may include a partial or full kitchen. The ADU may be integrated within or attached to the primary structure and may share utilities or access with the primary dwelling, and may be leased independently of the primary dwelling, but shall not be considered a Page | 78 separate dwelling unit for purposes of density or subdivision. Accessory Dwelling Units may be modular or factory-built. 2. Community Residence. A residential living arrangement in a single dwelling unit for individuals with disabilities who live together as a single housekeeping unit and benefit from the mutual support of other residents, with or without supervision or supportive services provided by resident or non-resident staff. A Community Residence includes both family arrangements (occupancy of a permanent or indefinite duration) and transitional arrangements (occupancy of a limited or temporary duration), and shall be treated as a residential use of the dwelling in which it is located. Community Residences include, without limitation, group homes and supportive or recovery-oriented living arrangements for persons with disabilities as defined under applicable fair housing law. 3. Home Occupation. A business or professional activity conducted within a dwelling unit that is incidental and subordinate to the primary residential use and does not generate significant external impacts. 4. Live/Work Unit. A dwelling unit that includes space designed to accommodate commercial, office, or other non-residential activities, which may be operated by residents or non-resident employees or tenants. Live/work units may include, but are not required to include, full kitchen facilities within the work portion of the unit, and the residential and work components may be occupied or leased independently, and shall be considered a single dwelling unit for purposes of density, regardless of occupancy or leasing arrangements. 5. Middle Housing. A residential building type that provides multiple dwelling units within a building form and scale compatible with single-unit residences, occupying the range between detached single-unit housing and large-scale multi-unit housing. Middle Housing includes, without limitation, duplexes, triplexes, fourplexes and other small multiplexes, townhouses and rowhouses, courtyard or cottage- cluster housing, stacked flats, and live/work configurations, whether newly constructed or created through the conversion or expansion of an existing structure. Middle Housing may be attached or detached, may be arranged around shared open space or access, and may be modular or factory-built. 6. Multi-Unit Residence. A building or portion thereof containing two or more dwelling units. Multi-Unit Residences may be modular or factory-built. 7. Overnight Living/Care Facility. A use providing medical care, non-medical care, supervision, or instruction for children or adults on a more than 24-hour basis, including assisted living, nursing, or memory care, and which may be operated within residential, commercial, or mixed-use settings, and may include indoor or outdoor activity areas. 8. Single-Unit Residence. A dwelling unit designed for occupancy by one household. Single-Unit Residences may be modular or factory-built. D. Commercial Uses: 1. Day Care Facility. A use providing non-medical care, supervision, or instruction for children or adults on a less than 24-hour basis, including childcare, preschool, and adult day care, and which may be operated within residential, commercial, or mixed-use settings, and may include indoor or outdoor activity areas. Page | 79 2. Eating and Drinking Establishment. A commercial business engaged in the preparation and service of food and/or beverages for consumption on or off the premises, including restaurants, cafes, bars, and similar uses. Eating and Drinking Establishments include, without limitation, the following types: a. Bar/Club/Lounge. An establishment primarily engaged in the sale and service of alcoholic beverages for consumption on the premises, which may include the accessory sale and service of food and the provision of entertainment such as live or recorded music, dancing, performance, or games. This classification includes bars, taverns, pubs, cocktail lounges, taprooms, wine and tasting rooms, and similar establishments, and may include indoor and outdoor service areas. b. Beer Garden. An outdoor area designed for the service and consumption of food and/or alcoholic beverages, which may include shared seating, shade structures, and gathering spaces. c. Food Court. A space containing multiple food and beverage vendors that share common seating and dining areas, and may be located within a building or in an outdoor setting. d. Food Truck Court. An area designated for multiple mobile food vendors, which may include shared seating, amenities, and gathering spaces. 3. General Retail. An establishment engaged in the sale, lease, or rental of new or used goods, merchandise, food, beverages, or services to the general public or to other businesses, including the display, storage, and handling of such goods incidental to their sale. Retail uses may include outdoor display areas. A retail use may include on-site food preparation, light assembly, fabrication, finishing, or repair of goods sold on the premises, instructional or demonstration activities, and incidental office, storage, and order- fulfillment functions that support the principal use. This definition includes thrift stores but excludes pawn shops and similar uses involving short-term collateralized lending. General Retail includes, without limitation, the following types: a. Convenience Store / Bodega. A small-scale retail establishment offering a limited range of food, beverages, and everyday goods for frequent or convenience-oriented purchases. b. Mercado. A market-style retail environment consisting of multiple small-scale vendors or stalls offering food, goods, or services, which may be located within a building or in an open-air setting. c. Personal or Business Services. Provision of recurrently needed services of a personal or business nature. This classification includes barber and beauty shops, seamstresses, tailors, dry cleaning agents (excluding large-scale bulk cleaning plants), shoe repair shops, self-service laundries, tattoo and body piercing shops, photocopying and photo finishing services, and travel agencies. 4. Lodging. A use providing accommodations to guests for periods of less than 30 days, including hotels, inns, hostels, and similar uses, which may include accessory services such as food and beverage, meeting spaces, or recreational amenities. Lodging shall not include Boarding Houses. 5. Office. A use consisting of spaces for professional, administrative, or business services, including offices for firms or organizations providing such services. Page | 80 6. Plant Nursery. A use involving the cultivation, storage, and sale of plants, which may include outdoor growing areas, greenhouses, and associated retail sales. Plant nurseries may operate as a commercial use or as part of site maintenance, landscaping, or phased development activities. They can be approved by an Increment Improvement Plan. 7. Pop-Up Market. A periodic, recurring, or temporary sales activity in which one or more vendors offer goods, food, beverages, or services from stalls, stands, tables, vehicles, or temporary structures, in an indoor or outdoor setting. Pop-Up Markets include, without limitation, farmers' markets, holiday and seasonal markets, artisan and craft markets, night markets, flea and vintage markets, and similar curated or community-based vendor events, and may include associated seating, entertainment, programming, and gathering areas. 8. Urban Agriculture. The cultivation, production, and distribution of food or plant-based products within a development, which may include ground-based growing, rooftop gardens, and indoor or vertical farming using soil-based or technology-enabled systems, as well as associated educational, research, or demonstration activities. Urban agriculture may include on-site sales such as farm stands or produce distribution and may be implemented as a permanent or interim use. 9. On-Site Production. The assembly, fabrication, alteration, or preparation of goods on-site as an accessory use to a permitted commercial, live/work, or home occupation activity. This may include food production and beverage processing permitted under applicable state or local regulations. E. Transportation Uses: 1. Mobility Hub. A designated area, network of areas, or system of facilities that provides shared mobility services to support safe, convenient, and reliable travel. Mobility hubs may include shared mobility services, bicycle facilities, micromobility devices, transit access, rideshare pick-up and drop-off areas, and related infrastructure designed to reduce reliance on single-occupancy vehicle trips. Mobility Hubs include, without limitation, bike parking and bike valet. 2. Parking Facility. An area or structure used for the parking of vehicles, which may be operated publicly or privately, including by the property owner or a third-party operator, and may provide parking for a fee or at no cost. Parking facilities may be actively managed, including through pricing, permitting, or operational controls. Parking facilities may include surface lots, structured parking, shared parking, or interim or unpaved parking areas, and are not required to be located adjacent to or dedicated to a specific use or building. Commercial parking as a primary use is considered a Parking Facility. Parking Facilities include, without limitation, the following types: a. Temporary Parking Lots. A parking area intended to serve short-term or interim needs prior to the development of permanent buildings or improvements. Temporary parking lots are not required to meet permanent landscaping standards and may utilize alternative dustproofing or surface materials appropriate for interim use. 8-3: Specialized Terms and Phrases. A. Accessory Structure. A structure that is physically detached from, secondary and incidental to, and commonly associated with a primary structure and/or use on the same site. The use of the Accessory Structure must not Page | 81 change the character of the use for the site. This definition includes, but is not limited to, the following detached accessory structures that are associated with a residential use property: Garages (covered or enclosed) for the storage of personal recreational vehicles and other personal property; guest houses, studios, workshops, greenhouses (noncommercial), enclosed cabanas and pool houses, storage sheds, outdoor saunas, and other similar enclosed structures. This definition also includes, but is not limited to, the following detached accessory structures normally associated with a nonresidential use property: Garages (covered or enclosed) for the storage of work related vehicles and equipment (including incidental restoration and repair), storage structures, workshops, studios, other similar enclosed or unenclosed structures. B. Accessory Use. A use customarily incidental to, related and clearly subordinate to a principal use established on the same lot or parcel of land, which accessory use does not alter said principal use nor serve property other than the lot or parcel of land on which the principal use is located. "Appurtenant use" means the same as accessory use. C. Bike Parking. Spaces, buildings, or facilities designed for the parking and storage of bicycles, e-bikes, scooters, and similar micromobility devices, which may include charging equipment, designated areas in residential units, racks, lockers, rooms, or secured storage structures/areas, and may be provided as short-term or long- term parking for public or private use. D. Bike Pump Park. A recreational track for bicycles, e-bikes, and similar small wheeled devices, which may include rollers, banked turns, and varied terrain, and may be constructed of dirt or hardscape materials. Not intended for gas-powered vehicles. May operate as part of a civic type or pursuant to an approved Interim Use Plan and/or Neighborhood Programming Plan. E. Bike Valet. A service that provides attended bicycle parking, including the temporary storage, security, and retrieval of bicycles for patrons. F. Community Garden. A civic space designed for the cultivation of plants by residents or users of the development for small-scale cultivation. G. Dwelling Unit. A room or suite of rooms designed for living, sleeping, eating, cooking, and sanitation, and intended for occupancy as separate living quarters. H. Interim Use. A temporary or interim physical improvement to a site or portion of a site implemented prior to or during phased development, including structures, installations, infrastructure, or site modifications that support interim or evolving uses. Interim Uses provide the physical layer (infrastructure, installations, and spatial definition), while Neighborhood Programming governs the programming and operation of those uses. Page | 82 I. Interim Use Plan. An Interim Use Plan (“IUP”) is a plan approved through an administrative review process for Interim Uses, including the proposed interim uses, their physical characteristics, and framework for safe operation, a defined area and time period, and may include multiple uses, installations, and activities. J. Liner Building. An occupiable structure designed to screen or mask a parking lot or parking structure from a street frontage. K. Measurement Related Definitions: 1. Build-to Line. A standard for building frontage specifying the percentage of the facade located at the prescribed setback. 2. Ground Floor Transparency. The percentage of the ground floor frontage, measured from floor to ceiling, that is constructed of transparent materials, including storefront glazing, windows, transoms, and doors. 3. Height. The vertical extent of a building measured in stories or feet. Where measured in feet, height is calculated to the eave of a sloped roof or the top of a parapet wall. Height limits do not apply to architectural or mechanical elements such as masts, belfries, chimneys, water tanks, or elevator bulkheads that occupy no more than ten percent of the roof area. 4. Setback. The minimum or maximum distance between property line and building facade. L. Neighborhood Programming. Programming or activities conducted within a site or designated area, including classes, events, markets, performances, or other uses that bring people and activity to the site. M. Neighborhood Programming Plan. A plan approved through an administrative review process that establishes the location, type, and operating parameters of recurring or evolving programming and events within the development. Activities conducted consistent with an approved Neighborhood Programming Plan “Neighborhood Programming Plan” may proceed through the administrative process. N. Outdoor Seating Area. An area designed for the outdoor consumption of food and/or beverages, located on the same property or within an adjacent public right-of-way, and accessory to an eating and drinking establishment. Outdoor seating areas may be the primary use while indoor space can be an accessory use. Outdoor seating areas may be used for the service of alcoholic beverages where permitted by a valid liquor license or an approved extension of premises. O. Parking Related Definitions: 1. Shared Parking. Parking spaces used by more than one use or user group, where demand occurs at different times of day or under different conditions. 2. Structured Parking. A parking facility located within or beneath a building or within a multi-level structure. P. Parklet. A small, publicly accessible extension of the sidewalk or public realm into the adjacent right-of-way, typically located within former parking or vehicular areas, and designed to provide seating, landscaping, dining, or other small-scale public amenities. Page | 83 Q. Paseo. A pedestrian-oriented passage or pathway that provides access and connectivity between buildings, streets, and civic spaces, and supports walking, social interaction, and neighborhood circulation. R. Private Open Space. An outdoor area intended for the exclusive use of the occupants of an individual dwelling unit, such as a patio, balcony, courtyard, yard, rooftop deck, or similar space directly accessible from the dwelling unit. S. Public Art. Art installations, features, or design elements located in publicly accessible spaces, including sculptures, murals, ground plane treatments, wayfinding elements, and integrated placemaking features, whether permanent or temporary, intended to enhance the public realm. T. Short-Term Rental. The rental of a dwelling unit or portion thereof for periods of less than 30 days. U. Sign Related Definitions: 1. Signage. Any device, structure, or visual display used to identify, advertise, or communicate information about a use, business, or activity, including building-mounted, freestanding, and temporary signs. Signage does not include public art, murals, wayfinding elements, or placemaking features. 2. Building-Attached Signage. Signs integrated into or mounted on a building, including wall, projecting, hanging, awning, or marquee signs. 3. Freestanding Signage. Signs supported independently from a building, including monument, pole, or post- and-panel signs. 4. Temporary and Directional Signage. Portable or limited-duration signs, including A-frame signs, window signs, and directional signage. V. Skate Park. A facility designed for skateboarding, roller skating, or similar activities, which may include ramps, rails, bowls, and other permanent or temporary features. They can be approved per an Interim Use Plan. W. Story. A habitable floor level within a building, typically 8' to 14' high from floor to ceiling. The number of stories is measured from the grade of the sidewalk of the primary street. X. Trash Related Definitions: 1. Shared Trash Facility. Any trash or recycling facility shared by more than four (4) tenants or owners. 2. Single Trash Facility. Any trash or recycling facility shared by four (4) or fewer tenants or owners. Y. Zones. A classification of areas within the development that establishes the intended character, intensity, and mix of uses, as well as applicable building form and development standards. Zones are defined in the Urban Design Guidelines and Building Form Standards. Page | 84