Development Booklet

PRELIMINARY DEVELOPMENT BOOKLET 
 
PLH22-0017 
 
 
 
 
 
APPLICANT: 
 
 
 
P.O. Box 1833, Tempe, Arizona 85280-1833  ª  T:  (480) 921-2800  ª  lauren.proper@huellmantel.com  
 
 
& 
H UELLMANTEL 
A FFILIATES

Narrative

PDP & COMPREHENSIVE SIGN 
PACKAGE 
 
South of Chandler Boulevard, on the east side of  
McQueen Road 
 
 
 
 
APPLICANT: 
 
 
 
 
P.O. Box 1833, Tempe, Arizona 85280-1833  ª  T:  (480) 921-2800  ª  charles@huellmantel.com  
& 
H UELLMANTEL 
A FFILIATES

SUMMARY 
 
Andy’s Frozen Custard is proposing to construct a new restaurant development south of 
Chandler Boulevard, on the east side of McQueen Road. The site is currently vacant and was 
recently platted to create two lots, the north lot for QuikTrip (in red) and the south lot for a 
commercial tenant – Andy’s (in yellow): 
 
. 
 
The site is currently vacant and has been for more than 20 years. The current QuikTrip #450 
plat, both Lot 1 and Lot 2, were rezoned from Agricultural, Community Commercial and 
High-Density Residential to PAD to allow commercial development with retail and office (C-2) 
uses in 2005 (DVR04-0049). The PDP for the QuikTrip for Lot 1 was approved during the 
Chandler City Council hearing in 2005. 
 
Condition of Approval #13 from DVR04-0049 states: 
 
#13. Along the south property line, drive-through uses are not permitted unless 
specifically approved through a separate future Preliminary Development Plan [PDP]. 
 
Per this condition, we are submitting this PDP application, concurrently with the 
Comprehensive Sign Package for the Andy’s Frozen Custard.

PRELIMINARY DEVELOPMENT PLAN 
 
The subject site, Lot 2 of the QuikTrip #450 Subdivision, is approximately 1.01 acres and has 
been vacant for more than 25 years: 
 
   Northwest corner, looking east 
 
 
Northeast corner, looking west 
            
 
 
The Andy’s building will be located along the north property line, allowing the drive-through 
access to circulate from McQueen Road, south around the Andy’s building, then curving to 
the north and exiting the drive-through headed west. Additional site access will come from 
the QuikTrip lot to the north. It should be noted that the location of the Andy’s is on the 
northern-most portion of the lot, maximizing the buffer between the business and the 
adjacent uses to the south. 
 
The Andy’s building will be approximately 1,275 square feet and approximately 21’-0” to the 
top of the tower element. Per the Chandler Zoning code, the development requires 6 
vehicular parking spaces – the Andy’s parking lot will provide 22 vehicular parking spaces. 
The drive-through portion of the site will allow for approximately 13 cars to stack at one time. 
 
Elevations: 
The Andy’s building will be constructed to match the approved QuikTrip, including the 
application of Stone Veneer, equal to El Dorado Stone in Limestone, York. The majority of the 
west elevation will consist of storefront windows while the east elevation will use the Stone 
Veneer to create a balanced bottom of the building, topped with EIFS in Dark Tan. The top of 
the building is defined through the use of a cornice roof structure, using Clear Anodized 
Aluminum with alternating color bands of Polished Aluminum and red accents, and a 
standing seam metal roof will be consistent with the surrounding development, including the 
neighboring QuikTrip building.  
 
Landscape: 
The landscape has been designed to buffer the building from the uses to the south and from 
McQueen Road. The south side of the site closest to the residentially zoned parcel to the 
21

south will be lined with evergreen trees, specifically five Shoe String Acacia (Acacia 
stenophylla). The perimeter of the parking lot and drive-through will include Red Push 
Pistache (Pistacia x. red push) and the landscape islands in the parking area will feature 
Evergreen Elm trees (Ulmus parvifolia). A cluster of Seedless Hybrid Mesquite trees (Prosopis 
seedless hybrid ‘AZT’) are proposed in the drive-through ordering area and Mulga trees 
(Acacia aneura) will buffer the site from McQueen Road.  
 
Mulga Tree: 
 
 
Seedless Hybrid Mesquite Tree:       Shoe String Acacia Tree: 
  
  
 
 
Red Push Pistache Tree:  
 
 
Evergreen Elm Tree: 
        
                
 
 
The proposed accents, shrubs, bushes and ground cover have been designed to compliment 
the tree palette, surrounding landscape and the Andy’s building. Brakelights Red Yucca 
(Hesperaloe parviflora ‘Brakelights’) provides a red flower that accents the red proposed on 
the building and on the neighboring QuikTrip. Additional statement plants such as Desert 
Spoon (Dasylirion wheeleri), Century Plant (Agave americana), Littleleaf Cordia (Cordia 
parvifolia) and Hopseed Bush (Dodonaea viscosa) will be added strategically to the site. The 
landscape palette has been designed as lush and inviting but also water conscious. 
 
Business Operations: 
The Andy’s Frozen Custard business will operate every day of the week. Hours of operation 
are from 11:00 a.m. to 11:00 p.m. This specific location will have a maximum of 12 employees 
working at one time.

COMPREHENSIVE SIGN PACKAGE 
 
The Andy’s Frozen Custard application for Preliminary Development Plan also includes a 
Comprehensive Sign Package request. The Andy’s development will feature one monument 
sign facing north and south on McQueen Road: 
 
 
 
The monument sign will be approximately 143” wide at the top (the widest portion of the 
sign) and approximately 125” tall at the tallest portion of the sign. The base of the monument 
sign will match the masonry finish of the Andy’s building and the body of the sign will be 
constructed of an LED illuminated contour aluminum cabinet with a pan-embossed, painted 
face. The colors will match that of the building and be complimentary to the QuikTrip to the 
north. 
 
The building will have signage on the elevations, including the name of the business facing 
south and north and an angled canopy with the word “Drive-Thru” on it:

Site Plan

Landscape Plan

Elevations

MAY 23, 2022
POLISHED ALUMINUM FASCIA WITH SEALED NEON TUBING.

Civil Plans

Comprehensive Sign Package

By continuing to view this art package, you hereby agree to not reproduce, replicate, redistribute, or otherwise copy this 
artwork. You also agree to not use this artwork for bidding purposes.  All images included in this package are property of 
Springfield Sign unless otherwise noted in writing. 
DISCLAIMER
ANDY’S FROZEN CUSTARD
Presented by Trey Watts
ao33198-CHANDLER, AZ-R4
CHANDLER, AZ
800.845.9927
springeldsign.com

SITE PLAN - NTS
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
NTS 
05/23/22
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-SITE PLAN
J. KROEGER
N/A
REV_0

2-SIDED MONUMENT w/ HALF CONE 
B
PAN FACE LED LIT CABINET WITH FULL COLOR
GRAPHICS APPLIED TO FACE, BLACK CABINET 
C
FLUSH MOUNTED 1-SIDED LED ILLUMINATED
CABINETS
 - FLAT FACES w/ 1 LINE CHANGEABLE COPY
   2 THUMB SCREW LATCHES PER RETAINER
   (4 TOTAL) - VANDAL COVER INCLUDED
                                        - PAINTED BLACK
D
QTY (2) - 100PC 8 ON 9 STD. COND. FONT 
LETTERS; QTY (1) - 50PC 8 ON 9 STD. COND. 
FONT PUNCTUATION SET
E
CAST LIGHTING
 - QTY (4) GROUND MOUNT FIXTURES
S7.1
ORTHOGRAPHIC VIEW - 3/4”=1’
S7.1
SIGN DETAILS
A
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
3/4” = 1’0” 
09/07/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-M2
NICHOLAS K. TARR/ J. KROEGER/CW
06/15/22
REV_8
F
PAINTED 1/4” ALUMINUM FCO ADDRESS 
NUMBERS - STUD MOUNTED FLUSH TO SIGN
STRUCTURE - PAINTED SILVER
A
B
C
ALL COLORS & FINISHES TO MATCH
BUILDING COLOR & MATERIALS
ALL ALUMINUM CONSTRUCTED CABINET
w/ DECORATIVE TOPPER TO MATCH
BUILDING STYLE & FINISH
72.0” OAH
X
102.4”
103.1”
1.6”
1.0”
52.7”
12.5”
44.2”
24.0”
36”X21” CONE
13.6”
11.5”
8.4”
71.1”
15.7”
10”
36”
X
X
X
F
6.0”
39.0”
6.2"
NEON ILLUMINATED VIEW
REVERSE CHANNEL CONTOUR CABINET
ALUMINUM FACE w/ CUT VINYL GRAPHICS
NEON TUBING LIGHTING MOUNTED TO FACE
OF SIGNS AS SHOWN REVERSE CHANNEL RETURNS
   - CLEAR BRIGHT YELLOW 12mm NEON
   - SNOW WHITE 10mm NEON
CLEAR POLYCARBONATE LENS TO COVER
AND PROTECT GLASS
  - MILLED FINISH STANDOFFS
X
X
X
X
1.5”
6.5"
6.5"
1.5”
40.8” NEON
ANDY’S STANDS OFF 1”
FROZEN CUSTARD
STANDS OFF 0.75”

400S/F
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
140S/F
19.5S/F
N/A
70LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-1
NICHOLAS K. TARR
70'-0"
05/24/22
REV_6
1
REVERSE CHANNEL CONTOUR CABINET
w/ RED HALO LIGHTING
2
ALUMINUM FACE w/ CUT VINYL GRAPHICS
3
NEON TUBING LIGHTING MOUNTED TO FACE
OF SIGNS AS SHOWN
   - CLEAR BRIGHT YELLOW 12mm NEON
   - SNOW WHITE 10mm NEON
4
CLEAR POLYCARBONATE LENS TO COVER
AND PROTECT GLASS
  - MILLED FINISH STANDOFFS
5
LED MODULES MOUNTED INTERNALLY TO
CLEAR POLYCARBOINATE FACING INWARD
TO CREATE HALO
 (RED LEDs)
4
1
2
3
ILLUMINATED VIEW
5
9”
17'-6"
SCALE: 3/16”=1’-0”
SCALE: 1/2”=1’
37.4”
70.0”
18.18 S/F
21'-0”
DOES NOT EXCEED 15% OF 21’ BUILDING HEIGHT

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-2
NICHOLAS K. TARR
05/23/22
REV_5
70'-0"
16"
35'-2"
1.5”
17'-6"
SCALE: 3/8”=1’-0”
SCALE: 3/16”=1’-0”
SIZING AND PLACEMENT TBD BY ENGINEERING PRIOR TO PRODUCTION 
9.9"
74.0”
5.09 SF

22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-3
NICHOLAS K. TARR
70'-0"
400S/F
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
WEST
140S/F
19.5S/F
N/A
70LF
05/24/22
REV_4
SCALE: 3/16”=1’-0”
SCALE: NTS
1
REVERSE CHANNEL CONTOUR CABINET
w/ RED HALO LIGHTING
2
ALUMINUM FACE w/ CUT VINYL GRAPHICS
3
NEON TUBING LIGHTING MOUNTED TO FACE
OF SIGNS AS SHOWN
   - CLEAR BRIGHT YELLOW 12mm NEON
   - SNOW WHITE 10mm NEON
4
CLEAR POLYCARBONATE LENS TO COVER
AND PROTECT GLASS
  - MILLED FINISH STANDOFFS
5
LED MODULES MOUNTED INTERNALLY TO
CLEAR POLYCARBOINATE FACING INWARD
TO CREATE HALO
 (RED LEDs)
4
1
2
3
ILLUMINATED VIEW
5
9”
37.4”
70.0”
18.18 S/F
21'-0”
DOES NOT EXCEED 15% OF 21’ BUILDING HEIGHT

SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
09/22/21
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-4
NICHOLAS K. TARR
3/16” = 1’0” 
70'-0"
CHANDLER, AZ
05/13/22
REV_3
16"
175"
1.5”
SCALE: 3/8”=1’-0”
SCALE: 3/16”=1’-0”
SIZING AND PLACEMENT TBD BY ENGINEERING PRIOR TO PRODUCTION 
5.09 SF
74.0”
9.9”

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-5
NICHOLAS K. TARR
05/24/22
REV_7
16"
34'-2"
SCALE: 3/8”=1’-0”
SCALE: 3/16”=1’-0”
SIZING AND PLACEMENT TBD BY ENGINEERING PRIOR TO PRODUCTION 
5.09 SF
9.9”
74.0”
TOTAL WINDOW AREA: 337.3 SF
ALLOWABLE SIGN AREA: 84.33 SF
SIGN SF AREA: 13.63 SF
SCOOPIN 
SCOOPIN 
THE 
THE FINEST 
FINEST SINCE 
SINCE 1986
1986
1
POLISHED ALUMINUM FASCIA
2
NEON LIGHTING OVER VINYL
GRAPHICS
3
ALUMINUM BACKER PANEL
4
ACCESS PANEL ON TOP OF ASSEMBLY
AS NEEDED
1
2
4
3
ALLOWABLE SQUARE FOOTAGE
140 SQUARE FEET
SQUARE FOOTAGE CALCULATION
33198-1: 37.4” x 70” = 18.18
33198-2: 9.9” x 74” = 5.09
33198-3: 37.4” x 72” = 18.18
33198-4: 9.9” x 74” = 5.09
33198-5: 9.9” x 74” = 5.09
TOTAL SQUARE FOOTAGE
51.63 SF

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/8” = 1’
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-6
NICHOLAS K. TARR
6'-0"
05/23/22
REV_6
25% OR LESS OF WINDOW AREA
(4) SIDED INTERIOR  STATIC SIGN
TOTAL WINDOW AREA: 210.8 SF
ALLOWABLE SIGN AREA: 52.7 SF
SIGN SF AREA: 51 SF
6'-0"
SIDE WINDOW VIEW
FRONT WINDOW VIEW
5'-6”
36"
(4) SIDED INTERIOR  STATIC SIGN
2
1
SUSPENDED FIBERGLASS CONE MOUNTED TO 
VERTICAL POLE
2
(4) SIDED INTERNALLY ILLUMINATED CABINET
w/ PAN EMBOSS FACES
1
TOTAL WINDOW AREA: 236.8 SF
ALLOWABLE SIGN AREA: 59.2 SF
SIGN SF AREA: 51 SF
51 SF

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
1
PAINTED SQUARE TUBE w/ WHITE REFLECTIVE
VINYL APPLIED TO BOTH SIDES
   PMS - 186 RED
2
HANGING METAL CHAIN
PAINTED BLACK
3
PAINTED PVC PIPE w/ WHITE REFLECTIVE
VINYL APPLIED AS SHOWN - PMS 186 RED
4
PAINTED STEEL PIPE
   PMS - 186 RED
5
DIGITALLY PRINTED POST SIGN FASTENED w/
ADJUSTABLE HOSE CLAMP BRACKETS
6
PAINTED BOLT HEAD COVER
  PAINTED  - PMS 186 RED
7
BASE PLATE FASTENED TO FOOTING
8
ROUND PIER FOOTING
S13.1
ORTHOGRAPHIC VIEW - NTS
S13.2
POST SIGN DETAIL - NTS
S13.3
VISUAL EXAMPLE - NTS
CLEARANCE 9’-0”
7
8
6
NO TRAILERS
MAX VEHICLE
HEIGHT IS 9’-0”
1
NO TRAILERS
MAX VEHICLE
HEIGHT IS 9’-0”
12"
18"
108"
109"
130"
3
2
4
FRAME REQUIRED TO PIVOT WITH
COLLISION, THEN ROTATE BACK INTO PLACE
4
5
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-7
NICHOLAS K. TARR
N/A
REV_0

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
1
ALUMINUM EXTRUDED CABINET
 COLOR = SILVER
2
4” ALUMINUM SQUARE POST
COLOR = SILVER
3
ACRYLIC w/ TRANSLUCENT VINYL GRAPHICS
1
2
3
S14.1
ORTHOGRAPHIC VIEW - NTS
S14.2
ILLUMIANTED VIEW - NTS
S14.3
ACRYLIC FACE DETAIL - NTS
DO NOT ENTER
4"
8"
6"
6"
36"
THANK YOU
24"
18"
THANK YOU
DO NOT ENTER
THANK YOU
23.75"
17.75"
DOUBLE SIDED DIRECTIONAL SIGNAGE
 - VERBIAGE AND QUANTITIES TBD
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-8
NICHOLAS K. TARR
N/A
REV_0

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
1
4” PAINTED ALUMINUM TUBE FRAME
 COLOR = BLACK (SAINT)
2
PAINTED STEEL PAN MAGNET BACKER
 COLOR = BLACK (SAINT)
3
FABRICATED ALUMINUM LIGHT SHIELD
4
LED DOWN LIGHTING
SINGLE SIDED MENU BOARD
S10.1
ORTHOGRAPHIC VIEW - NTS
S10.2
LIGHTING DETAIL - NTS
3
4
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
1/2” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-9
NICHOLAS K. TARR
5/23/22
REV_5
** WALK UP MENU MUST BE INTEGRATED ALONG BASE w/ MASONRY
      TO MATCH BUILDING
2
3
8"
3"
36"
75.5"
83.5”
95"
3"
** NO EXPOSED FASTENERS IN STEEL PANEL FACES
79.5”
1

1
4” PAINTED ALUMINUM TUBE FRAME
 COLOR = BLACK (SAINT)
2
PAINTED STEEL PAN MAGNET BACKER
 COLOR = BLACK (SAINT)
3
FABRICATED ALUMINUM LIGHT SHIELD
4
LED DOWN LIGHTING
S9.1
ORTHOGRAPHIC VIEW - NTS
S9.2
LIGHTING DETAIL - NTS
2
3
12"
3"
36"
75.5"
83.5”
95"
3"
3
4
** NO EXPOSED FASTENERS IN STEEL PANEL FACES
79.5”
1
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
DOUBLE SIDED MENU BOARD
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-10
NICHOLAS K. TARR
05/23/22
REV_5
** WALK UP MENU MUST BE INTEGRATED ALONG BASE w/ MASONRY
      TO MATCH BUILDING

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
MAGNETIC POSTER BOARDS
1
STEEL CABINET MAGNET BACKER
PAINTED STAIN BLACK
2
DOWNCAST LED LIGHTING
3
REPLACEMENT MAGNETIC SEASONAL MENU
2
3
S11.1
ORTHOGRAPHIC VIEW - NTS
S11.2
VISUAL EXAMPLE - NTS
1
4
BOLT COVERS PAINTED TO MATCH STRUCTURE
4
24"
36"
2.5”
36"
3"
8"
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-11
NICHOLAS K. TARR
N/A
REV_0

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
INTERIOR SCOOPIN’ SIGN
1
ALUMINUM FACE PAINTED BLACK
2
CUT VINYL APPLIED  TO FACE
S15.1
ELEVATION DETAIL - 1.5” =1’0”
S15.2
ILLUMINATED VIEW - NTS
3
NEON TUBING
  - CLEAR BRIGHT YELLOW 12mm NEON
  - SNOW WHITE 10mm NEON
4
POLISHED ALUMINUM RETURNS
5
3/16” POLYCARBONATE FACE w/ MILLED
FINISH STANDOFFS
6
LED ILLUMINATED ALUMINUM CABINET w/
CUSTOM WOOD FINISH REVERSE CUT FACE
 - PUSH THROUGH ACRYLIC w/ APPLIED VINYL
1
2
3
3
4
5
6
SCOOPIN 
SCOOPIN 
THE 
THE FINEST 
FINEST SINCE 
SINCE 1986
1986
48.5”
26"
6"
60"
32.7”
5"
SCOOPIN 
SCOOPIN 
THE 
THE FINEST 
FINEST SINCE 
SINCE 1986
1986
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-12
NICHOLAS K. TARR
N/A
REV_0
13.63 SF

ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
1
35’ FLAG POLE STANDARD ALUMINUM
FINISH w/ INTERNAL HALYARD
2
12’x 8’ AMERICAN FLAG, HIGH QUALITY,
DOUBLE WEAVE DESIGN, 2-SIDED
3
LIGHTING & FOUNDATION TBD PER SITE
SPECIFIC CONDITIONS & ENGINEERING
NS4.1 ELEVATION VIEW DETAIL - NTS
NS4.2
VISUAL EXAMPLE - NTS
35'-0"
12'-0"
8'-0"
1
2
2
SEE ENGINEERING
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-13
NICHOLAS K. TARR
N/A
REV_0

SURFACE MOUNTED BENCH
1
PAINTED SURFACE MOUNTED BENCHES
2
6’x 8’ LENGTHS AVAILABLE 
3
OPTIONS : WITH OR WITHOUT BACKS
MANUFACTURER:
SUPERIORRECREATIONALPRODUCTS.COM
NS6.1 ELEVATION VIEW DETAIL - NTS
8’0” 
6’0”
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
400S/F
400S/F
400S/F
400S/F
50LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-14
NICHOLAS K. TARR
N/A
REV_0

400S/F
SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
140S/F
19.5S/F
N/A
70LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-15
NICHOLAS K. TARR
N/A
REV_0
2
3
1
STEEL CABINET MAGNET BACKER
PAINTED STAIN BLACK
2
DOWNCAST LED TUBE LIGHTING
3
REPLACEMENT MAGNETIC SEASONAL MENU
1

SCALE: 
CREATED:
APPROVED BY:
800.845.9927
#
CLIENT:
LOCATION:
SALES:
DRAWING #:
DESIGN:
REV DATE:
3/16” = 1’0” 
10/29/21
CHANDLER, AZ
TREY WATTS
7225
ANDY’S FROZEN CUSTARD
ao33198-16
NICHOLAS K. TARR
N/A
REV_0
2
3
1
STEEL CABINET MAGNET BACKER
PAINTED STAIN BLACK
2
DOWNCAST LED TUBE LIGHTING
3
REPLACEMENT MAGNETIC SEASONAL MENU
1
ELEVATION:
ALLOWABLE S/F:
PROPOSED S/F:
EXISTING S/F:
TOTAL S/F:
FRONTAGE:
EAST
140S/F
19.5S/F
N/A
70LF
22/22/22
This drawing is copyrighted material. It remains the property of Springfield Sign unless otherwise agreed 
upon in writing. It is unlawful to use this drawing for bidding purposes, nor can it be reproduced, copied, 
or used in the production of a sign without the written permission from Springfield Sign, Inc.

1. DOCUMENT ATTACHMENT As allowed by this contract, other 
documents such as but not limited to E2 quotes, product 
specications, manufacturer's specications, etc. may be 
referenced in the area in the beginning of this Sign Purchase 
Agreement. These documents may have additional terms, 
conditions, pricing, restrictions, limitations or otherwise as describe by 
those written instruments, such as but not limited to LED (or other 
types) of electronic displays.
2. LIMITED WARRANTY Seller warrants all new materials and/or 
services delivered herein to be at time of completion of job and time 
of delivery, to Buyer, to be free from defects of material and/or 
workmanship. Seller agrees to repair or replace, solely at Seller's 
discretion, any products or parts thereof, which are found defective 
in material or workmanship within 90 days from time of installation of 
sign or sign product. Seller's obligation with respect to such products 
or parts shall be STRICTLY LIMITED to replacement or repair and in NO 
event shall Seller be liable for consequential, incidental or special 
damages, or for transportation, installation, adjustment or any other 
expenses which may arise in connection with such products or parts, 
including but not limited to loss of business or loss of trade. THIS 
WARRANTY IS EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER 
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THERE 
ARE NO OTHER WARRANTIES. Seller's obligations hereunder shall 
extend only to defects for which Buyer shall have given Seller written 
notice thereof within ninety (90) days after date of delivery or 
installation, as applicable. Buyer is NOT authorized to make 
independent arrangements for warranty work. All warranty work on 
said signs, products, parts, services, as described herein, shall be 
arranged or subcontracted by Seller or be done by Seller's 
employees or representatives, solely at the discretion of the Seller. In 
the event that Buyer does not permit Seller to inspect product, 
access property or in any other way directly or indirectly inhibits the 
Seller to arrange for or conduct necessary repair work required 
under this Agreement, or Buyer makes independent arrangements 
for such repair work, Buyer agrees that Buyer will be solely responsible 
for the costs of such repairs. In the event Buyer does not comply with 
the above, Seller hereby EXCLUDES ALL WARRANTIES, EXPRESS 
AND/OR IMPLIED, AND BUYER PURCHASES THE SIGN, SIGN PRODUCT 
AND/OR SERVICES "AS IS" and WITH ALL FAULTS, WAIVING ALL 
WARRANTIES HEREUNDER. Additional limitations include but are not 
limited to, acts of God, acts of nature, vandalism, acts of War or 
Terrorism and/or accidental damages. 
3. INSURANCE As long as any amount of monies is due and owing to 
Seller, Buyer shall insure sign, sign products or services, in an amount 
no less than monies due Seller, and NAME SELLER in the loss payable 
clause of such insurance policy, strictly for the benet of the Seller. 
Buyer further agrees to not limit the insured causes allowing for re or 
any other casualty. Buyer shall furnish Seller with evidence of such 
certication of insurance, in writing from Buyer's insurance agent or 
agency, upon Seller's demand. Seller's certicate of insurance for 
liability/workers compensation shall be provided by Seller to buyer 
upon request from Buyer.
4. TAXES Buyer shall be responsible for and pay all taxes including but 
not limited to Sales, Use, Personal Property or any other municipal, 
county, state or federal taxes that may be levied, imposed or 
assessed by law on the sign product, parts or services or 
improvements thereon, or uses of such. Buyer agrees to reimburse 
Seller for any amount for such taxes, that may be billed to and paid 
by Seller. Any interests or penalties associated with any taxes as 
outlined herein will also be due and owing to Seller if so paid by 
Seller. These taxes, as allowed by law, may or may not be assessed 
at time of initial sale or delivery of sign product, parts or services and 
may continue forward in time without end.
5. PERMITS/LICENSES Seller shall not be obligated to commence 
fabrication of sign product, parts or services until all necessary 
permits have been issued. If permits are denied after reasonable 
effort by both parties to secure same, then this Sign Purchase 
Agreement shall terminate without liability to either Buyer or Seller, 
except that Buyer shall pay Seller for reasonable compensation for 
labor and costs expended until the time permits are denied. Buyer 
shall be responsible for securing and maintaining in effect written 
consent from the owner of record of the premises upon which sign 
product, parts or services is to be installed and for all other private 
permissions, consents or licenses, including but not limited to, the use 
of registered trademarks or copyrights used on the sign product, 
parts or services, necessary for the manufacture, the installation, 
maintenance and use of such. The only exception to this will be if the 
Buyer's Guarantee to Build check box at the beginning of this Sign 
Purchase Agreement is checked. The terms and conditions for this, 
briey being stated herein, shall GUARANTEE FULL PAYMENT TO 
SELLER with no guarantee to Buyer that the sign product, parts or 
services will be utilized to any benet of the Buyer. Buyer will be 
obligated to pay the full contract price, including installation and will 
have to make arrangements for receipt of, off loading of and 
storage of sign product, parts or services with no future claims for 
installation, service or maintenance of such from Seller. The Buyer's 
Guarantee to Build is strictly offered to allow manufacturing of sign 
product, parts or services to proceed WITHOUT the proper permits 
obtained. It in no way obligates Seller to be adverse to the law for 
installation (without permits) of sign product, parts or service.
6. INSTALLATION OF SIGN PRODUCT Buyer agrees to and stipulates 
that Buyer has designated the location for the sign product, parts or 
services and subsequent installation of such and is responsible for all 
required materials, labor and any other associated expense, at 
Buyer's risk, for the necessary requirements for proper, obstruction 
free and/or lawful installation. Obstructions, obstacles or other 
encumbrances, includes but is not limited to building reinforcement, 
building or site alterations, all obstacles as required for successful, 
safe, lawful installation including but not limited to overhead (power 
lines, buildings, trees or other encumbrances), underground (such as 
utilities, easements, rocks, buried objects natural, man made or 
otherwise), landscaping, sidewalks, planters, asphalt, concrete or 
any other such improvements, construction crews other that Seller's 
or Seller's agents or Buyer's normal business trafc, Seller will not be 
responsible for any damages for such items during the normal 
installation process. Any return trips or delays or overtime charges 
incurred will be passed on to Buyer at Buyer's expense.
7. ASSIGNMENT This Agreement shall be binding and inure to the 
benet of the parties hereto, their respective successors, executors, 
administrators, assigns and legal representatives; provided, however 
that the interests of Buyer herein shall be assigned only with the 
expressed, written consent and approval of Seller. No transfer or 
assignment of this Agreement or any interest hereunder shall release 
Buyer from their obligations herein.
8. DEFAULT OR BREECH OF AGREEMENT The parties stipulate that the 
sign product, parts or services is(are) not an article of general trade 
or utility but is uniquely designed and is to be constructed and/or 
installed at the request and for the sole and special purposes of 
Buyer. The sign product, parts or services is of no value to Seller, and 
therefore, has no resale or other value to anyone other than Buyer, 
this Agreement is not cancelable except with expressed written 
permission of the Seller. Buyer shall be deemed to have breached 
this Agreement by insolvency, default in payment amounts or 
schedules as set forth herein, abandonment of the sign product, 
parts or services or vacating the premises where such is located, 
termination or transfer of Buyer's interest in the premises or business, 
appointment of a receiver for Buyer's business, the ling of a 
voluntary or involuntary petition of bankruptcy with respect to Buyer, 
or any act or omission of Buyer in contravention to this Agreement. In 
addition to Buyer's other obligations hereunder, in the event Seller 
shall institute any action or lawsuit for the enforcement of the 
obligations of Buyer herein, Buyer shall pay and indemnify Seller for 
all costs of court, reasonable attorney's fees expended, interest 
expenses of 2% per month or as allowed by law whichever is more, 
collection fees, administration fees, and, pay Seller all amounts 
awarded by the court as a result of such proceedings. Buyer's 
breach of any provision in any other Sign Purchase Agreement or 
other instruments as put forth by Seller or Conrmation of Order with 
Seller shall also be deemed to be a breach hereunder, and Seller 
may suspend its performance and delivery under this and all other 
agreements with Buyer until Buyer provides Seller with adequate 
assurance of performance within a reasonable time, not exceeding 
ten (10) days, after Seller has informed Buyer orally or in writing, of its 
grounds for insecurity.
9. COPYRIGHTS, TITLE & CONVEYANCE OF OWNERSHIP Seller 
specically retains ownership and/or title of sign product, parts or 
services until Buyer has performed and fullled all terms and 
conditions required by Seller, herein, or as otherwise allowed by law 
to Seller's benet. Buyer also, conveys to Seller the absolute right to 
access property to remove sign product or parts from said property, 
should any default arise on Buyer's behalf, and, to pay for all 
necessary costs for removal and possible subsequent re-installation 
of said product at expense in addition to that outlined herein, solely 
at Buyer's risk and expense. Buyer agrees and will defend same that 
Seller shall at all times have title to all original drawings, designs and 
specications relating to the work hereunder, which were developed 
or created by or on behalf of Seller, and Seller hereby claims 
copyrights, where applicable, of all such drawings, designs and 
specications. Payment of all or part of any amounts hereunder 
does not pass title to the "original drawings, designs, specications" of 
said sign product, parts or services, although the same may be 
reproduced with the expressed written consent of Seller. Buyer shall, 
upon request of Seller, promptly return all such drawings, designs and 
specications, and copies thereof, to Seller during all times which 
Buyer owes Seller any amounts hereunder. Buyer agrees that Seller 
has specic legal rights in the form of Copyrights or other instruments 
given by law to Protect and does hereby declare Seller's ownership 
of all drawings artwork and the like during and after the terms of the 
Agreement herein.
10. MANUFACTURING SPECIFICATIONS/INDUSTRY STANDARDS Buyer 
understands and agrees to allow Seller, solely at Seller's discretion to 
make modications for and conforming to Seller's standard 
manufacturing practices. It is also understood by Buyer, that no 
color, shape, dimension or any other specic feature of said sign 
product, parts or services is guaranteed absolute. As practical 
examples absolute color matches or dimensions are not guaranteed 
and will be allowed reasonable differences within industry standards. 
Buyer agrees that Seller may mark and label sign for legal, national 
code, electrical, manufacturing, advertising or other requirements 
and purposes as is reasonably necessary to conduct day-to-day 
business as allowed or required in the industry and for Seller's own 
satisfaction and benet. 
12. SUBJECT TO PRIOR SALE Used sign products, new or used products 
offered for resale from other manufacturers, such as but not limited 
to electronic displays may be subject to prior sale affecting price 
and or delivery times to Buyer. Seller will not be responsible for any 
consequences related to such issues. This includes promotional or 
sales or any other type of proposal made to customer, Seller has no 
authority or control over other manufacturers and Seller employ's 
numerous sales agents all of whom may be promoting the same sale 
item, thus depleting any available inventory.
13. CHANGE ORDERS Any alteration, deviation and/or reasonably 
signicant variance from the scope of work, construction or labor or 
otherwise from the sign(s) or products or services as outlined herein, 
including all extra costs, hereafter called Change Order, will be 
executed only upon written orders and may become an additional 
charge over and above the price stated herein. Any such Change 
Order requested by Buyer must be agreed to by Seller, in writing and 
solely at the discretion of the Seller. It is understood that any Change 
Order could necessitate the need for a price increase, an extension 
in the time required to complete the work outlined herein or any 
other reasonable and necessary charges, terms, conditions, 
equipment or the like as so required to execute the Change Order.
14. SUSPENSION OF MANUFACTURING Any request or event or 
otherwise required by Buyer to delay, suspend, cancel or otherwise 
impede the manufacture, delivery and/or installation of said sign 
product, parts or services, for any reason or occurrence out of the 
control of Seller, then Buyer shall immediately pay the full purchase 
price or any amount remaining and due to Seller. Furthermore, upon 
such request, Buyer shall be solely responsible for storage charges 
and any increases in labor and/or material costs incurred by Seller in 
the manufacturing process. Buyer's failure to comply with this 
provision will be deemed and construed as an anticipatory breach 
of this Agreement. In the event Buyer complies with the foregoing, 
Seller will complete the manufacturing, delivery and/or installation 
within a reasonable period of time upon reasonable request of 
Buyer.
15. SECURITY INTEREST Buyer grants Seller a SECURITY INTEREST in the 
sign product, parts and/or services until all obligations to Seller, 
hereunder are fully paid. Seller may le and record this Agreement 
as a nancing statement under Chapter 400 of the Missouri Uniform 
Commercial Code Section 400.9-521, in addition to any other 
permitted standard or nonstandard forms. If Buyer shall fail to pay as 
agreed to herein, Seller (or Seller's agents or representatives) shall 
have the right, and will be defended by Buyer, and is hereby 
authorized and empowered to take and resume possession of and 
remove into Seller's possession, with or without process of law, the 
sign product, parts or services and all other property described 
herein, wherever found, and remove and sell the same at either 
public or private sale, or by any other viable method, as deemed 
solely by Seller, at such time and place as Seller shall choose, and as 
allowed by law. Seller shall apply the proceeds of such sale as a 
credit upon the obligations of Buyer hereunder. In such event, Seller 
is entitled to recover all expenses of sale, including any reasonable 
attorney's fees necessary in handling the matter, without prejudice 
to Seller to the further enforcement of any balance of such 
obligation due Seller by Buyer, or expenses remaining due from such 
sale. In the event the proceeds of such sale exceed the balance of 
Buyer' obligation to Seller and the expenses of such sale, Seller shall 
forward any such excess to Buyer. Buyer shall not use said sign 
products as to lessen the value of Seller's SECURITY INTEREST or impair 
the operation of said sign product, and in the event the sign product 
is damaged through the intentional acts or willful negligence of 
Buyer, Buyer's customers, its agents or employees, contractors or third 
parties, or by wind, hail, earthquake, re, war, tornado, hurricane, 
ood, labor dispute, vandalism, acts of God or acts of nature, Buyer 
agrees to pay for the necessary expenses to restore said sign 
product, part or services in operable condition. After delivery and/or 
installation, whichever is contracted for, in the event the sign 
product is lost, stolen, destroyed, or otherwise impaired, Buyer shall 
remain liable to Seller for all amounts hereunder, UNTIL BUYER'S 
OBLIGATIONS TO SELLER ARE FULLY SATISFIED HEREUNDER, THE 
PROPERTY DESCRIBED HEREIN WILL REMAIN PERSONAL PROPERTY OF 
SELLER WHETHER THE SAME IS ATTACHED IN ANY MANNER TO THE 
REALTY OR NOT. SAID PROPERTY SHALL NOT, BY REASON OF 
ATTACHMENT OR CONNECTION TO THE REALTY, BECOME OR BE 
DEEMED A FIXTURE OR APPURTENANT TO SUCH REALTY. No transfer, 
renewal, extension, or assignment of the Agreement or of any 
interest hereunder, and no loss, damage or destruction shall release 
Buyer or any Guarantor from the obligations assumed hereunder. 
During all times in which Buyer is obligated for any amounts to Seller 
hereunder, Buyer shall keep said property free from all tax liens and 
other encumbrances, and any sum of money that may be paid by 
Seller to release any such liens or encumbrances shall be paid on 
demand by Buyer in addition to the obligations secured hereunder.
16. WAIVER OF CONSUMER RIGHTS
17. DELIVERY AND PERFORMANCE Seller shall not be held responsible 
for, and the period of time required for completion of any project or 
maintenance or repairs, shall be tolled during any time when Seller is 
delayed or prevented from completing the obligations hereunder 
because of strikes, equipment breakage, re, war, terrorism, labor 
disputes, commercial delays, acts of God/nature, regulations or 
restrictions of any government entity or public authority, or any 
accidents or forces, conditions, or circumstances beyond Seller's 
control, and Seller shall not be liable for any loss whatsoever suffered 
by Buyer, directly or indirectly, as a result of any such events or 
occurrences. Buyer agrees to examine and inspect all installations, 
repairs, and maintenance, and within ten (10) days, notify Seller in 
writing of any complaints about work performed under this 
Agreement. The failure of Buyer to give such written notice shall 
constitute acceptance of the work performed. The provisions of the 
paragraph shall not be limited by any provision in which time is 
made of the essence. Notwithstanding anything in this Agreement to 
the contrary, if at any time prior to completion of this Agreement 
Seller's prospects for payment are, in Seller's sole discretion, impaired, 
Seller may require payment in advance before permitting delivery or 
any installation or services hereunder, and may demand Buyer's 
immediate performance of Buyer's obligations hereunder. If 
requested by Seller, Buyer shall furnish evidence, satisfactory to Seller, 
prior to commencement of Seller's work hereunder or at any time 
thereafter, that sufcient funds are available and committed to pay 
the full amount owing by Buyer under this Agreement.
18. STATE OF JURISDICTION/SEVERABILITY/MISCELLANEOUS All 
representatives of Seller are stipulated and specied in this 
Agreement. No modications hereof shall be valid unless made in 
writing AND agreed to, AND signed by both Seller and Buyer. No 
waiver by either party hereto shall be a waiver of any subsequent 
breach of or failure to perform the same or any other term, 
condition, or obligation hereof. It is agreed by both parties hereto 
that venue of any action arising under the Agreement shall be in 
Greene County, Missouri and the laws of the State of Missouri shall 
govern this Agreement. Should any part of this Agreement 
contravene public policy or laws of the jurisdiction in which it is 
sought to enforce the same, then such part shall be considered null 
and void and have no force and effect, and the balance of the 
terms and conditions of this Agreement shall remain valid and in full 
force and effect. Buyer expressly grants Seller the right to use 
photographs, drawings or other replicas of the sign product 
specied herein in its brochures, pamphlets, displays, sales 
documents or other advertising or promotional media in the ordinary 
course of business of Seller. Seller may place on the sign product its 
name, telephone number and location of such information, as shall 
be determined by Seller and solely by the Seller. Buyer agrees that 
Buyer is purchasing said sign product for business or commercial 
purposes or use and not for personal, family or household use or 
purposes. In regard to payment of any amount due hereunder, time 
is of the essence.
© 2021 Springfield Sign, All Rights Reserved
All wiring on the premises to the site of the signs· installed location, including the connection of the sign to such primary wiring source is to be the responsibility of the Buyer, at 
additional cost to the Buyer, at the direction of the Buyer. as designed by the Buyer or Buyer's agents and, as necessary, all other aspects and expenses, as required, to bring primary 
electrical wiring to the sign’s location for energizing of such signs. All voltages to be 120 Volt at 60 Hertz unless otherwise specified. Any damages caused by the energizing circuit to 
the sign or sign products due to improper design (including but not limited to improper voltages), improper connection thereof or any other causes related to the energizing primary 
circuitry will be solely and completely at the Buyer's risk and expense. Any additional work, trouble shooting in the field, by phone, by internet or otherwise required on behalf of 
Seller will be bi/Jed in addition to Buyer on a Time and Materials basis, at additional expense. All Permit fees/Engineering fees and labor/drawing costs for the acquisition thereof will 
be billed in addition to prices stated herein at additional expense unless specifically outlined in this document to be bi fled in another manner as described herein. Any required 
sales/use taxes are the responsibility of the Buyer, now and in the future as so levied by applicable governing authorities. All taxes are due and payable upon demand by Seller at or 
any time subsequent to the execution of this SIGN PURCHASE AGREEMENT. It is understood that taxes are in addition to the prices outlined in the SlGN PURCHASE AGREEMENT, 
E2 Quote or any other document outlining the signs, products or services for stated Job Location unless specifically and clearly outlined otherwise. It is expressly and undeniably 
understood by both Buyer (or Buyer's agents, subcontractors, salespersons, etc.) and Seller that no verbal agreement has been entered into. Both parties are to adhere to the terms 
and conditions of this SIGN PURCHASE AGREEMENT and related attachments as properly executed and initialed. Any governing entity outside the control of Seller, such as but not 
limited to, any applicable City/Municipalities, County Office/Agent, national codes (such as but not limited to NEC, BOCA, ETC.) with jurisdiction or control upon the product, labor 
(manufacturing or installation) or any issues, procedures or otherwise related to the execution of the terms, signs, sign products, services or otherwise, foreseen or unforeseen, may 
affect the costs and timely delivery of such products/services herein NOTICE: THIS IS A LEGAL DOCUMENT WITH BINDING OBLIGATIONS READ BOTH SIDES OF THIS 
INSTRUMENT BEFORE SIGNING, AS THE TERMS OF THIS SIGN PURCHASE AGREEMENT ARE SET OUT THEREON, The specific terms for payment may vary based on product 
types or other reasons, but it is expressly understood that PAYMENT IN FULL as outlined by this Agreement is due and must be paid PRIOR TO INSTALLATION OF SIGN PRODUCT, 
PARTS OR SERVICES. All outstanding balances over 30 days due are subject to a 2% per month (collectively compounding) Late Fee. 
BUYER:
COMPANY NAME:
BILLING ADDRESS:
CITY:
STATE:
D/B/A:
This agreement, made and entered into this _____ day of _____ (month), 20 ___ (year), by and between 
Springfield Sign & Graphics, INC. d/b/a Springfield Sign (herein after referred to as Seller), and Buyer (as 
outlined below and labeled as Buyer) witnesseth, that the Seller agrees to manufacture for Buyer the sign(s) 
and/or other sign products/services as outlined in a separate E2 document as follows, QUOTE Number: 
______ or other such unique document of description as follows: 
Buyer’s Guarantee to Build ________ (initials)
Rejection of Buyer’s Guarantee to Build ________ (initials)
JOB DETAILS:
COMPANY NAME:
BILLING ADDRESS:
CITY:
STATE:
D/B/A:
DESCRIPTION
CONTACT
FINE PRINT
AGREEMENT
BUYER:
I/We have read this entire agreement and agree to defend
and hold harmless Seller as stated herein. ACCEPTED:
By: _____________________________________
PRINTED NAME:
TITLE:
DATE:
SELLER:
ACCEPTED:
By: _____________________________________
Mark Wessell, CEO
Springfield Sign
4825 E Kearney St
Springfield, MO 65803